UltimateSpeed Car Seat Cover / Boot Cover

IAN: 289555

Features
Scratch-resistant and hard-wearing
Washable at 30°C

Intended use
This product is intended to protect the back seats of your vehicle from dirt. The product is for private use only.
§ Scope of delivery
1x Dog Car Seat Blanket
1x User Manual
Option 1: Covering the entire back seat, for example if you want to transport a dog
Place the product over the back seats. The PVC-coated side is on the underside and the zipper faces the front seats. Lead
the four click closures around the headrest and close them (Fig. I). If necessary, prevent the blanket from slipping down by attaching the hooks of the elastic bands to the buckle straps for the
front seat. Pull the seat belts, if necessary, through the seat belt openings (Fig. II).
Option 2: Covering the rears seat, if you need space for a passenger
Open the zipper in the footwell (Fig. III). Loosen one click closures at the headrest of the front seat where the space is needed for a passenger. And tuck the click
closure under the product. Pull the seat belts through the seat belt openings. On the other side, attaching the hooks of the elastic bands to the buckle straps to prevent the blanket from slipping
down if necessary (Fig. III). Proceed the same way on the other side, if you need space for more passengers.
Option 3: Covering rear seats with folded back rest
Place the product over the back seats. The PVC-coated side is on the underside and the zipper faces the back seats. If
necessary, prevent the blanket from slipping down by attaching the hooks of the elastic bands to the buckle straps for the
front seat (Fig. IV). Lead the four click closures around the headrest and close them. Open the zipper and pull down the according back rest (Fig. V).
§ Cleaning and care
You can clean the product in the washing machine at 30 °C delicate cycle

Please follow and like us:

Leave a Reply

Your email address will not be published. Required fields are marked *