PARKSIDE compressed air set, 5 compressed air devices and accessories, pressure 6.3 bar 71-piece compressed air set including numerous accessories

PARKSIDE® compressed air set, 5 compressed air devices and accessories, pressure 6.3 bar 1


5 compressed air devices for impact screwing, screwing, chiseling, grinding and blowing out
1 pneumatic impact wrench with 4-stage adjustable impact performance and square holder (½ “)
1 pneumatic ratchet screwdriver with square socket (½ “)
1 pneumatic chisel hammer with round shank tool holder (10 mm)
1 compressed air rod grinder with 2 attachment shafts (3 mm / 6 mm)
1 compressed air blow gun with continuous dosing
66-piece compressed air accessories including various adapters, assembly tools, thread sealing tape and oil
8x CRV nuts – 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 17mm, 19mm
1x 4mm hex key
1x adapter 1/2 “to 3/8”
1x adapter 1/2 “to 1/4”
9x 25mm screwdriver bits (2x PH2, 1x PH3, T10, T15, T20, 2x 5, 6.5)
1x spring
3x 120mm picks, HRC 42-48
5x grinding bits, shaft diameter 3.2mm
5x grinding bits, shaft diameter 6mm
1x 6mm grinding arbor
10x sanding belt
1x 1/8 “collet
2x spanners for the DL rod grinder
5x 1/4 “plug nipple (external thread)
1x 1/4 “plug (internal thread)
1x 1/4 “quick coupling
2x ball needles
1x ball needle adapter
1x ball nozzle for deflating
1x inflation gun adapter
1x inflation nozzle
1x rubber inflation nozzle
1x conical nozzle
1x oil bottle
1x thread sealing tape
1x storage case according to LIDL guideline
Technical details

DL impact wrench
Max working pressure: 6.3 bar
Min. Working pressure: 4.2 bar
Air consumption: 350 l / min
Mount: drive square 1/2 “
Release / torque: max. 310 Nm
DL ratchet
Max working pressure: 6.3 bar
Torque: 61 Nm
Speed: 160 / min
Air consumption: 400 l / min
Tool connection: 1/2 inch
DL chisel hammer
Working pressure: max. 6.3 bar
Mount: 10.2 mm hex (optionally also round shank)
Number of blows: 4,500 min
41 mm stroke (theoretical travel)
Air consumption 460 l / min. at 6.3 bar
DL rod grinder
recommended working pressure: 6.3 bar
Speed: 20,000 rpm
Air consumption: 198 l / min (at 4bar)
Collet size: 6.35 mm (pre-assembled)
DL blow gun
Dosing continuously

DL impact wrench: powder-coated aluminum
DL ratchet: powder-coated aluminum
DL chisel hammer: powder-coated aluminum
DL rod grinder: powder-coated aluminum
Accessories: metal with various surface coatings
Case: hard polyethylene (HDPE)

DL impact wrench: approx. 221 x 194 x 66.5 mm
DL ratchet: approx. 285 x 62 x 41 mm
DL chisel hammer: approx. 183.5 x 123.5 x 49.5 mm
DL rod grinder: approx. 194 x 70 x 42.2 mm
Case: approx. 400 x 302 x 110 mm

DL impact wrench: approx. 2040 g
DL ratchet: approx. 1226 g
DL chisel hammer: approx. 1090 g
DL rod grinder: approx. 575 g
Accessories: approx. 1566.2 g
Case: approx. 1320 g

Leave a Reply

Your email address will not be published. Required fields are marked *