PARKSIDE long-term glaze »Rosewood«, 5 l content, weather and UV resistant Consumption: approx. 50 ml / m² Contents: approx. 5 l Color: rosewood Weather & UV resistant Suitable for softwood & hardwoods For outside & inside

properties

Weather & UV resistant and suitable for softwood & hardwood
Low odor and breathable
Makes a silky surface
Can be diluted with water
Areas of application inside: for wooden surfaces, cladding and profiled wood
Areas of application outside: for external cladding, wooden houses, roof cladding, garden houses, carports, pergolas, half-timbering
For renovating existing glaze coatings
Suitable for many types of wood; wherever the best weather protection and a hard-wearing surface are desired
PARKSIDE PUR long-term glaze is not suitable for wooden floors and walked areas!
Consumption: approx. 50 ml / m²
Sufficient for approx. 50 m 2 with a single coat
Color: rosewood
Processing tips

Wood inside: Wood inside can be treated with PARKSIDE PUR long-term glaze without wood protection primer.
Wood on the outside: Woods on the outside that are to be protected against blue stain and rot must be primed with a wood preservative (use wood preservative carefully. Always read the label and product information before use). The wood must be clean, dry and stable. Peeling old coatings and grayed wood should be sanded down to the healthy wood. Scrape out resin spots and clean with Universal Thinner
Repair wood damage beforehand
Stir PARKSIDE PUR long-term glaze well and apply with a soft glaze brush
Apply quickly in the direction of the grain
After complete drying, apply the 2nd coat
Low temperatures and high humidity delay the drying time
A test coat is recommended
Outside, the wood must be protected against rain for about 4 hours after painting
Do not process in direct sunlight and below 5 ° C or above 25 ° C
Permitted wood moisture:
Softwoods: max. 15%
Hardwoods: max. 12%
Storage and transport frost-free
content
5 liters