PARKSIDE drill accessories set »PDZ 276 A2«, 276 pieces, for wood, plastic and metal
Scope: 276 pieces
Suitable for: wood, plastic and metal

PARKSIDE® drill accessories set »PDZ 276 A2«, 276 pieces, for wood, plastic and metal 1

characteristics

For drilling, milling, engraving, polishing, cleaning, grinding or cutting
For wood, plastic and metal
For common multifunctional tools and fine boring grinders (suitable for e.g. Parkside, Dremel, Proxxon etc.)
Incl. manual
276 pieces:
52 x sanding belts
9 x felt discs
2 x rubber polishing discs 22mm (diameter)
3 x sanding drums (small / medium / large)
12 x diamond cutter
2 x diamond cutting disc
9 x HSS drill bits
3 x collets
6 x aluminum oxide whetstone
4 x silicon carbide whetstone
3 x PP brush
3 x wire brush
1 x brass brush
6 x aluminum oxide grinding wheel
6 x silicon carbide grinding wheel
6 x grinding wheel
6 x rubber polishing tips
40 x silicon carbide sandpaper in storage box
40 x aluminum oxide sandpaper in storage box
36 x cutting discs in storage box
1 x polishing paste in storage box
1 x whetstone
1 x mandrel for felt disc
1 x mandrel for grinding wheel
1 x mandrel for cutting disc
1 x open-ended wrench
16 x cutting discs, fiberglass reinforced
4 x sanding fans
1 x intake sandpaper
1 x plastic box with handle and 2 side locks for fixing
material

Sanding belts (small, large): cotton, aluminum oxide
Felt disc: wool
Rubber polishing pad: rubber
Sanding drum (small, medium, large): rubber, carbon steel
Diamond cutter: diamond chips and aluminum oxide in a nickel matrix
Diamond cutting disc: silicon carbide and a few diamond fragments in a nickel matrix
HSS drill bit: HSS steel
Collets: brass
Grinding stone: aluminum oxide
Handle: carbon steel
Grinding stone: silicon carbide, carbon steel
Brush: polypropylene (PP), steel
Wire brush: steel wire with zinc coating
Brass brush: brass wire
Aluminum oxide grinding wheel: pink aluminum oxide
Silicon Carbide Grinding Wheel: Silicon Carbide
Grinding wheel: white aluminum oxide
Rubber polishing tips: aluminum oxide
Handle: carbon steel
Silicon carbide sandpaper in storage box: aluminum oxide, paper
Aluminum oxide sandpaper in storage box: aluminum oxide, paper
Separating disc in storage box: resin
Polishing paste: paraffin oil
Grinding stone: gray aluminum oxide
Mandrel for felt discs, grinding discs and cutting discs: carbon steel
Open-ended wrench: carbon steel
Cutting disc, reinforced with fiberglass: resin with fiberglass mesh
Sanding fan: cotton, carbon steel
Inclusion of sandpaper: rubber, carbon steel
Storage box: polyamide, glass fiber (PA6 + GF30)
Dimensions
approx. 18 x 18.5 x 12.8 cm
Weight
circa 955

Leave a Reply

Your email address will not be published. Required fields are marked *