PARKSIDE® 20V cordless combination device 4in1 »PKGA 20-Li C2«
From our PARKSIDE X 20 V Team series

PARKSIDE® 20V cordless combination device 4in1 »PKGA 20-Li C2«, without battery and charger

On / off switch with speed control
Quick stop
Ergonomic handle with soft grip
IC in the device housing
IC protection functions device:
Overvoltage protection
Output short-circuit monitoring
Monitoring of the cell temperature
Discharge monitoring
Deep discharge protection
Robust plastic carrying case
Included accessories: 6 screw bits, 50mm (CRV), 6 drilling bits (1.5 / 2/3/4/5 / 6mm), 1 bit extension 50mm, 1 metal saw blade HSS 150 / 18TPI, 1 wood saw blade HCS 150 / 6TPI, 5 sanding sheets: 2xP60, 2xP120, 1x P240, 1 multi oscillation accessory set (1 scraper, 1 plunge-cut saw blade, 1 delta sanding plate + 3x sanding paper: P60, P80, P120 (93 x 93 x 93mm)

Technical specifications

Speed: 21,000 min-1
Engine type: 755 engine
Drill driver attachment:
2-speed gearbox
Idle speed (1st gear / 2nd gear): 0-400 / 0-1350 min-1
13 mm drill chuck, metal
Spindle lock function
Torque: 35 Nm (hard screw joint)
Torque levels: 19 + 1
Concentricity: max.0.35mm at 75mm length
Sound pressure level: max. 75 dB (A)
Sound power level: max. 94 dB (A) (according to GS report)
Saber saw attachment:
Speed: 0-3200min-1
Knife quick change system
Multi sander attachment:
Speed: 0-9000min-1
for sandpaper 138x97mm
Multi-function tool attachment:
Speed: 0-20000rpm
Oscillation 3.0 °
Quick-change system


PA6 + GF30


Motor unit and drill / driver attachment: approx. 23.2 x 6.95 x 19.5 cm
Saber saw attachment: approx. 17.6 x 11.5 x 6.8 cm
Multi-sander attachment: approx. 13.7 x 9.8 x 9.3 cm
Multi-function tool attachment: approx. 9.5 x 5.5 x 10.3 cm
Case: approx. 42.1 x 32 x 11.3 cm


Motor unit: approx. 640 g
Drill driver attachment: approx. 596 g
Saber saw attachment: approx. 800 g
Multi-sander attachment: approx. 370 g
Multi-function tool attachment: approx. 384 g
Case: approx. 1190 g

Leave a Reply

Your email address will not be published. Required fields are marked *