PARKSIDE® drill and chisel hammer »PBH 1050«, 1050 wattsPower: 1,050 watts Impactstrength: 3.0 joules Impactrate: 0-5,300 rpm

PARKSIDE® drill and chisel hammer »PBH 1050«
properties
For powerful processing of concrete, stone, metal or wood
Pneumatic hammer mechanism with high impact force
Central selector switch for all functions:
Drilling – without impact
Hammer drilling – with the hammer mechanism switched on
Chiselling – activated hammer mechanism with rotation stop
Setting for chisel alignment (stepless)
Adjusting wheel for speed limitation
Keyless chuck with mounting according to the SDS-Plus system
Attachable keyless chuck for round shank drills
Anti-slip soft grip equipment
Additional handle can be rotated 360 °
Mains connection indicator light
Including carrying case
Included accessories: 1 pointed chisel (250 mm), 1 flat chisel (250 mm), 3 drills (Ø 6/8/10 mm x 150 mm), 1 depth stop, 1 keyless chuck for round shank drills, 50 g special grease for drill bit holder

Technical specifications
Rated consumption: 1,050 watts
Impact strength: 3.0 joules
Number of beats: 0-5,300 min-¹
Idle speed: n0 0–980 min-¹
Max. Drilling diameter: 26 mm in concrete and stone / 13 mm in metal / 32 mm in wood
material
Housing: plastic, fiberglass

Dimensions
Hammer: approx. 393 x 229 x 102 mm
Additional handle: approx. 93 x 202 x 70 mm
Keyless drill chuck: approx. 42.4 x 111 mm
Set of 3 bits: approx. 10 x 150 mm
Pointed chisel: approx. 14 x 250 mm
Flat chisel: approx. 14 x 250 mm
Depth stop: approx. 210 mm
Case: approx. 423 x 314.5 x 118 mm
Cable length: approx. 4 m
weight
Hammer: approx. 3600 g
Additional handle: approx. 155.8 g
Keyless drill chuck: approx. 280 g
Set of 3 bits: approx. 145 g
Pointed chisel: approx. 230 g
Flat chisel: approx. 235 g
Lubricating grease: approx. 50 g
Depth stop: approx. 46 g
Case: approx. 1280 g