Category: Parkside Performance

Posted on

PARKSIDE PERFORMANCE 20 V smart battery “PAPS 204 A1”, 4 Ah, controllable via the Lidl Home app
Compatible with all devices in the PARKSIDE X 20 V Team
series Battery voltage: 20 volts
Battery capacity: 4 Ah

PARKSIDE PERFORMANCE 20 V smart battery »PAPS 204 A1«, 4 Ah, controllable via the Lidl Home app
properties

Compared to the PARKSIDE battery 20 V / 2 Ah PAP 20 B1:
100% more runtime with the same battery size (dimensions)
70% higher discharge currents for more power
Smart battery technology: Lithium-ion battery in a new, powerful dimension through the use of 21700 cells
Long service life: cell balancing – longer battery runtime and service life thanks to evenly loaded cells
Compact & strong: high energy density with small size
More power: permanently high performance with impressive endurance without loss of performance
Retrieve battery data and configure performance parameters via Bluetooth® using the Lidl Home app
Adjustable modes: Performance, Balanced, Eco and Expert
Configurable for optimal adaptation to the PARKSIDE 20 V cordless device
Battery monitoring – data retrieval on the state of charge, remaining time, charging time, total usage time and much more
Exploits the charging potential to the maximum
Battery display LED with 3-level charge level indicator
Compatible with all devices in the PARKSIDE X 20 V Team series

OUR TIP:
To check the battery status, press the “Battery Status” button. The condition or
remaining power is shown to you in the battery display LED as follows:

♦ RED / ORANGE / GREEN = maximum charge
♦ RED / ORANGE = medium charge
♦ RED = low charge – charge the battery

Technical specifications

Type: Lithium Ion
Rated Voltage: 20V
Capacity: 4Ah
Charge status display: 3 levels
Battery monitoring: via the Lidl Home app

Dimensions

approx. 12.3 x 5.2 x 8.4 cm

Weight

about 600g

Posted on

PARKSIDE PERFORMANCE 20 V cordless plane »PPHA 20-Li A1«, without battery and charger
From our PARKSIDE PERFORMANCE series
Speed: max. 14000 rpm
Rebate depth: max. 17 mm
Planing width: 82 mm

PARKSIDE PERFORMANCE 20 V cordless plane »PPHA 20-Li A1«, without battery and charger

properties

Brushless motor (brushless motor) – particularly long service life due to less wear
Easy chamfering with three V-grooves
Replaceable HSS reversible planer knives
Discharge side selectable left or right
Connection for external chip extraction (incl. adapter)
Handle with non-slip soft grip equipment
Storage compartment for assembly tools
Incl. carrying case
Device compatible with all batteries from the PARKSIDE X 20 V Team series
Delivery without battery and charger

You can order the right battery and charger here.

Accessories included:2 HSS planer knives (pre-assembled), 1 dust extraction adapter,
1 wrench, 1 Allen key

Technical specifications
Idle speed: 14000 rpm
Planing width: 82 mm
Depth of cut: 0-2 mm
Fold depth: max. 17 mm

Dimensions

approximately 12″ x 6″ x 7.5″.

Weight

approx. 2.1 kg

Posted on

PARKSIDE PERFORMANCE saber saw blades »PFSZP 3 A1«, 2-part
Variants: for metal, wood and plastic, green waste
Set: 2 pieces

PARKSIDE® PERFORMANCE saber saw blades Performance »PFSZP 3 A1«, 2-piece
properties

2 application-optimized saw blades for the best cutting quality
For common saber saws with a 12.7 mm universal shank mount (½) (suitable for Parkside, Bosch, Hitachi, Makita, Metabo, among others)

“Green waste” set:
Suitable for wood and greenwood
2 HCS saw blades – powerful and efficient
228.5mm blade 3 TPI: Firewood (20-175mm), Greenwood (Ø 20-175mm)
226.6 mm blade 5 TPI: lumber, firewood (15-190 mm), greenwood (Ø<190 mm)

“Wood / plastic” set
Suitable for wood, wood with nails and plastic
2 HCS saw blades – powerful and efficient
152.5mm sheet 6 TPI – Plunge Cut: Wooden Walls <75mm, Structural Wood 6-10mm, Plywood and Plastics 10-100mm, MDF and Chipboard 6-60mm
152.5mm sheet 3 TPI – Curve and Plunge Cut: Lumber 20-100mm, Greenwood <100mm

“Fine metal” set
Suitable for sheet metal, pipes and profiles
2 bi-metal saw blades – flexible and break-resistant
151.5 mm blade 18 TPI: Medium-thick sheet 1.5-4 mm, medium-thick tubes and profiles Ø 5-100 mm
151.5 mm blade 24 TPI – Fineblanking: Thin sheet 0.7-3 mm, thin-walled tubes and profiles Ø 5-100 mm

material

steel

Weight

Green waste: approx. 79 g
Wood+Plastic: approx. 43 g
Metal fine: approx. 48 g

Posted on

PARKSIDE PERFORMANCE 20 V cordless saber saw »PSSAP 20 Li C3«, without battery and charger
From our PARKSIDE PERFORMANCE series No-
load stroke rate: 0–3000 rpm Stroke
length: 22 mm

PARKSIDE PERFORMANCE 20 V cordless saber saw »PSSAP 20 Li C3«, without battery and charger
properties

Effortless cutting of wood, plastic, metal and building materials
Brushless motor – particularly durable, powerful and low-wear
Infinitely controllable number of strokes via switch
Tool-free extendable base plate for variable cutting depth
Incl. 2 high-quality saw blades for wood and metal
Integrated LED light
Non-slip soft grip equipment
Tool-free saw blade change with quick-release chuck
Compatible with standard saw blades
Includes carrying case
Device compatible with all batteries from the PARKSIDE X 20 V Team series
Battery recommendation: 20 V (4 Ah)
Delivery without battery and charger
You can order the right battery and charger here.

Accessories included: 2 saw blades (for wood and metal)

Technical specifications

No-load stroke rate: 0–3000 rpm
Stroke length: 22mm
Max. cutting capacity: 150 mm in wood, 15 mm in steel, 20 mm in non-ferrous metal, 100 mm in metal pipes

material

plastic, fiberglass

Dimensions

approx. 39 x 16 x 8 cm

Weight

approx. 1.57 kg

Posted on

PARKSIDE PERFORMANCE diamond drill bits »PDBK 3 A1«
Rated speed: max. 13300 rpm
Working depth: approx. 35 mm

PARKSIDE PERFORMANCE diamond drill bits »PDBK 3 A1«
properties

For all common angle grinders with M14 mount (suitable for e.g. Parkside, Bosch, Black & Decker, Metabo)
Ø 30 / 68 mm
For dry drilling in porcelain, granite, marble and all similar materials
2 pieces
Ø 18 / 22 / 27 / 35 mm
For dry drilling in porcelain, granite, marble and all similar materials
4 pieces
Ø 45 / 53 mm
For dry drilling of fine stoneware, granite, marble and similar materials
Housing made of high-quality C45 steel
2 pieces

Technical specifications

Max. rated speed: 13300 rpm
Working depth: approx. 35 mm

material

steel

Weight

Ø 30 / 68 mm
30mm: 123g
68mm: 303.5g
Ø 18 / 22 / 27 / 35 mm
18mm: 91g
22mm: 97.4g
27mm: 105.3g
35mm: 152.3g
Ø 45 / 53 mm
45mm: 198g
53mm: 223g

Posted on

PARKSIDE PERFORMANCE cordless angle grinder »PWSAP 20 Li C3«, 20 V, without battery and charger
From our PARKSIDE PERFORMANCE series
Speed: 10000 rpm Disc sizes
: up to Ø 125 mm

PARKSIDE PERFORMANCE cordless angle grinder »PWSAP 20 Li C3«, 20 V, without battery and charger

properties

Brushless motor – particularly durable, powerful and low-wear
Rugged die-cast aluminum gear case with 3-position front handle
Electronically controlled soft start (soft start) and quick stop
Tool-free protective hood quick adjustment
Suitable for all commercially available discs up to Ø 125 mm (e.g. from Parkside)
Can also be used with cup or disc brushes
Incl. Spindle Lock quick-action clamping nut for tool-free changing of the grinding wheel
Compared to the PARKSIDE cordless angle grinder PWSA 20-Li B3:
up to 49% higher cutting speed for flat steel
up to 23% higher cutting speed for tiles
up to 10 x longer engine life
Device compatible with battery from the “PARKSIDE X 20 V Team” series
Recommended battery: 20 V (4 Ah)
Battery and charger are not included

You can order the right battery and charger here.

Included accessories: 1 grinding wheel (Ø 125 mm), 1 wrench

Technical specifications

Speed: 10000 rpm
Disc sizes: up to Ø 125 mm
Mount: M14 – SPINDLE LOCK

material

Die-cast aluminum

Dimensions

approx. 34 x 26.8 x 12.5 cm

Weight

approx. 1.9 kg

Posted on

PARKSIDE PERFORMANCE plasma cutter with integrated »PPSK 40 A1« compressor

PARKSIDE PERFORMANCE plasma cutter with integrated »PPSK 40 A1« compressor
properties

With integrated compressor – external compressed air supply not required
Completely pre-assembled and ready to use
Also ideal for mobile use – compact design and low weight
Electronically controlled, quiet and even plasma jet
For precise and clean cuts up to 12 mm material thickness
Suitable for cutting steel, iron, stainless steel, aluminum and copper
Infinitely adjustable cutting current (15 to 40 A)
High-quality 2.5 m cutting cable with interchangeable torch attachments and detachable roller guide
Grounding cable (2 m) with strong clamp
0.5 m compressed air hose with quick connection system (“Quick-Connect\”)
Active electric fan cooling
Overload protection by thermal monitor with indicator light
Coated sheet steel housing with ergonomic carrying handle
Additional compressed air inlet for alternative compressed air supply via external compressor
Included accessories: 2 torch sleeves (1 pre-assembled), 2 electrodes (1 pre-assembled), 1 roller guide, compressed air hose with quick connection system (“Quick-Connect”)

Technical specifications

Cutting process: plasma jet, electronically controlled
Cutting Current: 15-40A
Max. cutting capacity: steel 12 mm / iron 10 mm / stainless steel 8 mm / aluminum 8 mm / copper 4 mm
Compressed air supply: via integrated compressor
Working pressure: 4-4.5 bar
Rated voltage: 230 V / 50 Hz

material

sheet steel

Dimensions

approx. 341 x 223 x 244 mm

Weight

about 11 kg

Hints

Electromagnetic compatibility: Class A

Posted on

PARKSIDE PERFORMANCE reciprocating saw blades »PFSZP 3 A1«, 2-partDelivery on time by Christmas!

Variants: for metal, wood and plastic, green waste
set: 2 pieces

PARKSIDE® PERFORMANCE reciprocating saw blades Performance »PFSZP 3 A1«, 2-part
properties

2 application-optimized saw blades for the best cutting quality
For common reciprocating saws with 12.7 mm universal shank holder (½ ) (suitable for Parkside, Bosch, Hitachi, Makita, Metabo, among others)

“Green cut” set:
Suitable for wood and green wood
2 HCS saw blades – powerful and efficient
228.5 mm sheet 3 TPI: firewood (20-175mm), green wood (Ø 20-175 mm)
226.6 mm sheet 5 TPI: Lumber, firewood (15-190 mm), green wood (Ø <190 mm)

“Wood / plastic” set
Suitable for wood, wood with nails and plastic
2 HCS saw blades – powerful and efficient
152.5 mm sheet 6 TPI – plunge cut: wooden walls <75 mm, construction timber 6-10 mm, plywood and plastics 10–100 mm, MDF and chipboard 6–60 mm
152.5 mm sheet 3 TPI – curve and plunge cut: construction timber 20–100 mm, green wood <100 mm

Set “metal fine”
Suitable for sheet metal, pipes and profiles
2 bi-metal saw blades – flexible and break-resistant
151.5 mm sheet 18 TPI: Medium-thick sheet metal 1.5–4 mm, medium-thick tubes and profiles Ø 5–100 mm
151.5 mm sheet 24 TPI – fine cut: thin sheet 0.7–3 mm, thin-walled tubes and profiles Ø 5–100 mm

material

stole

weight

Green waste: approx. 79 g
Wood + plastic: approx. 43 g
Metal fine: approx. 48 g

Posted on

PARKSIDE PERFORMANCE plasma cutter with integrated compressor »PPSK 40 A1«Working pressure: 4–4.5 barNominal voltage: 230 V / 50 HzCutting current : 15–40 A

✓ With integrated compressor
✓ Also ideal for mobile use
✓ Infinitely adjustable cutting current

PARKSIDE PERFORMANCE plasma cutter with integrated compressor »PPSK 40 A1«
properties

With integrated compressor – no external compressed air supply required
Completely pre-assembled and ready for immediate use
Also ideal for mobile use – compact design and low weight
Electronically controlled, calm and even plasma jet
For precise and clean cuts up to 12 mm thick
Suitable for cutting steel, iron, stainless steel, aluminum and copper
Infinitely adjustable cutting current (15 to 40 A)
High-quality 2.5 m cutting cable with exchangeable torch attachments and removable roller guide
Earthing cable (2 m) with a strong clamp
0.5 m compressed air hose with quick connection system (“Quick-Connect \”)
Active electric fan cooling
Overload protection by thermal monitor with control lamp
Housing made of painted sheet steel with ergonomic handle
Additional compressed air inlet for an alternative compressed air supply via an external compressor
Included accessories: 2 burner covers (1 pre-assembled), 2 electrodes (1 pre-assembled), 1 roller guide, compressed air hose with quick connection system (“Quick-Connect”)

Technical specifications

Cutting process: plasma jet, electronically controlled
Cutting current: 15-40 A
Max. Cutting capacity: steel 12 mm / iron 10 mm / stainless steel 8 mm / aluminum 8 mm / copper 4 mm
Compressed air supply: via an integrated compressor
Working pressure: 4–4.5 bar
Nominal voltage: 230 V / 50 Hz

material

Sheet steel

Dimensions

approx. 341 x 223 x 244 mm

weight

about 11 kg

Hints

Electromagnetic Compatibility: Class A

Posted on

PARKSIDE PERFORMANCE plasma cutter with integrated compressor »PPSK 40 A1«Working pressure: 4–4.5 barNominal voltage: 230 V / 50 HzCutting current : 15–40 A

✓ With integrated compressor
✓ Also ideal for mobile use
✓ Infinitely adjustable cutting current

PARKSIDE PERFORMANCE plasma cutter with integrated compressor »PPSK 40 A1«
properties

With integrated compressor – no external compressed air supply required
Completely pre-assembled and ready for immediate use
Also ideal for mobile use – compact design and low weight
Electronically controlled, calm and even plasma jet
For precise and clean cuts up to 12 mm thick
Suitable for cutting steel, iron, stainless steel, aluminum and copper
Infinitely adjustable cutting current (15 to 40 A)
High-quality 2.5 m cutting cable with exchangeable torch attachments and removable roller guide
Earthing cable (2 m) with a strong clamp
0.5 m compressed air hose with quick connection system (“Quick-Connect”)
Active electric fan cooling
Overload protection by thermal monitor with control lamp
Housing made of painted sheet steel with ergonomic handle
Additional compressed air inlet for an alternative compressed air supply via an external compressor
Included accessories: 2 torch covers (1 pre-assembled), 2 electrodes (1 pre-assembled), 1 roller guide, compressed air hose with quick connection system (“Quick-Connect”)

Technical specifications

Cutting process: plasma jet, electronically controlled
Cutting current: 15-40 A
Max. Cutting capacity: steel 12 mm / iron 10 mm / stainless steel 8 mm / aluminum 8 mm / copper 4 mm
Compressed air supply: via integrated compressor
Working pressure: 4–4.5 bar
Nominal voltage: 230 V / 50 Hz

material

Sheet steel

Dimensions

approx. 341 x 223 x 244 mm

weight

about 11 kg

Hints

This class A welding device is not intended for use in residential areas in which the power supply comes from a public low-voltage supply system. Both conducted and radiated interference can make it difficult to ensure electromagnetic compatibility in these areas.

Exit mobile version