Category: Parkside

Posted on

PARKSIDE Infrared Thermometer

For fast surface temperature measurement
Ideal for locating thermal bridges and mould risk areas
Precise infrared measurement signal
8 point laser indicates the measuring area
Colour display and signal for differences between the selected reference value and the measured value
Battery change indicator and automatic switch-off (60 seconds)
Ergonomic handle with soft grip
Battery and instruction manual included
Operating modes: simple measurement / reference measurement
Measuring range: -50 to +380°C
Deviation (>0°C / <0°C): ±1.5°C / ±3°C
Selectable reference levels: ± 0.5 / 3 / 5.5°C
Measuring units: °C and °F
Optics: 12:1 (ratio of measuring distance measuring range)
Blue = measurement is colder than reference value
Red = measurement is warmer than reference value
Green = measurement is approximately the same as the reference value
3-year warranty

Posted on

PARKSIDE Laser Distance Measurer

For precise measurement of distances, areas and volumes
Pythagoras function (indirect length measurement)
Continuous measurement with min/max display
Optional addition or subtraction of measurements
Memory function (max. 100 measurements)
3 reference points – measurement from the leading / trailing edge or from an integrated positioning pin
Backlit LCD display with battery status indicator
Automatic OFF function
Built-in spirit level
Measuring range: 0.05-50m
Measurement accuracy (typical): ± 1.5mm
Measuring units: metric and imperial
Alkaline batteries and instruction manual included
Laser Class 2
3-year warranty

Posted on

PARKSIDE Digital Auto-Range Multimeter

For measuring current, voltage and resistance as well as for diode and continuity testing
Easy to use with automatic range selection (auto-range function)
Continuity test with acoustic signal / diode check
Automatic polarity display (for negative values)
Display for alternating and direct current (AC/DC) as well as Ohm, Volt and Ampere (Ω / V / A)
2 measuring tips with leads (each 80cm long)
Large, clearly laid out LCD display
With memory function and auto-off function
Fold-out stand
Includes screwdriver, battery and instruction manual
Measurement category: CAT ||| 300V
Measuring ranges:

DC voltage: 0.1mV⎓ to 300V⎓
AC voltage: 1mV ~ to 300V~
DC/AC Current: 0.1μA to 10A
Resistance: 0.1Ω to 20MΩ
Square wave signal generator frequency: 1kHz
3-year warranty

Posted on

PARKSIDE Cordless Screwdriver with Exchangeable Attachments

Versatile – comes with 4 different attachments
Torque attachment with adjustable torque level – ideal for small screws and delicate materials
Off-set angle attachment – makes driving in screws close to edges easier
Angle screw attachment for hard-to-reach areas
Cutting attachment for soft materials such as cardboard, textiles, leather or other flexible materials
Magnetic bit holder with hexagonal shank
Automatic spindle lock for manual screwdriving
Integrated LED work lights
LED displays for forward / reverse operation and low battery charge
With soft-grip non-slip elements
Charger is not included
Battery: 4V Li-Ion (1.5Ah)
Max. torque: 10Nm
Rated no-load rotation speed: n₀ 200min-¹
Charging time: 60 minutes
Attachments included: 1 torque attachment, 1 off-set angle attachment,
1 angle screw attachment, 1 cutting attachment
Accessories included: 26 bits (25mm), 2 bits (50mm), 1 bit extension
Instruction manual and USB charging cable included
3-year warranty

Posted on

PARKSIDE Staple Gun Set

Multi-purpose
For easily securing fabrics, film, wall coverings and other materials
Safety clip to prevent accidental release
Integrated staple slide
Includes storage box and instructions
1000 staples included: 250x 4mm, 500x 6mm, 250x 8mm
Fits staple sizes 4–8mm

Posted on

PARKSIDE Tool Kit – 64-piece set

Neatly organised inside a practical hardwearing case
7x open-ended spanners
8x hex keys
1x pair of water pump pliers with dualcomponent handle
1x pair of combination pliers with dualcomponent handle
1x pair of long-nose pliers
1x voltage tester
1x magnetic screwdriver handle
1x precision screwdriver handle
20x 25mm bits
10x 28mm bits
1x hammer with fibreglass handle
1x spirit level
1x knife with snap-off blades
5x spare snap-off blades
1x handsaw with 1 saw blade

Posted on

PARKSIDE Jigsaw

Fast cutting progress thanks to the
3-stage adjustable pendulum action
Fine adjustments without pendulum action
Includes 2 high-quality saw blades (Swiss Made)
Laser guide and LED work light
Electronically adjustable stroke rate
Tool-free adjustment of the base plate
with cutting angles adjustable on both sides
Ergonomic barrel handle with non-slip rubber grip
Blower function to ensure a dust-free cutting line
Connection for external dust extraction – includes suction nozzle with reducer piece
SAW LOCK keyless chuck for easy saw blade exchange
Transparent blade guard
Splinter guard
For standard saw blades with a single lug shank (e.g. from
Parkside, Bosch, Metabo, Makita)
Power consumption: 800W
No load stroke rate: 0-3100spm
Stroke length: 26mm
Max. cutting depth: max. 80mm in wood / 12mm in aluminium / 8mm in metal
Bevel cut left/right: 0°/22.5°/45°
Cutting angle adjustment: tool-free
Guidance aid: laser and parallel guide
Included accessories: 1 wood saw blade (Swiss Made), 1 metal saw blade (Swiss Made), 1 parallel guide, 1 adaptor for external dust extraction including a reducer piece (pre-assembled)
Includes practical storage case
Power cable length: 4m
3-year warranty

Posted on

PARKSIDE Table Saw

For precise cuts in wood, chipboard, furniture panels and plastics
2 rotation speeds for different materials
Adjustable cutting heights
Laser cutting guide
Tilting saw blade for precise mitre cuts
Adjustable angle stop with practical scale
Parallel guide with quick-lock for precise cutting width adjustment
Ready-to-use push stick in side mount
Connection for external dust extraction
Powder-coated steel frame with hardwearing rubber feet
Table with extendable work surface
Protected on/off switch
Includes 2 high-quality carbide saw blades Ø 254mm (24 and 48 teeth / bore 30mm)
Easy to assemble
Power consumption: 2000W
Rotation speed: (2 speeds): 3200rpm / 5000rpm
Mitre angle: -60° to + 60°
Cutting height: max. 85mm
Cutting line preview: laser
Table dimensions (without parallel guide): 58 x 54.5cm / with extension 58 x 101cm
Power cable length: 3m
3-year warranty

Posted on

PARKSIDE Drain Cleaner

Clears blockages from clogged pipes – no need for chemicals
Claw end – simply crank the handle to clear blockages
Length: 3m
Tube made from zinc-coated spring steel
Tube diameter: 9mm
Claw diameter: 19.5mm

Posted on

PARKSIDE Multi-Angle Ruler/Architect Triangular Scale/Quick Square

Choose from:

Multi-Angle Ruler

With 4 adjustable rulers – for measuring angles and shapes on bricks, stones, tiles and any angled material
Ruler with cm/inch markings
Architect Triangular Scale
With colour-coding – easily select the scale you want
3-sided with 6 different scales: 1:100 – 1:200 (red), 1:300 – 1:400 (blue), 1:500 – 1:600 (yellow)
Measurement range: 0-30cm
Quick Square

For 90° or 45° mitre angles
Easy to read markings