Category: Ultimate Speed

Posted on

ULTIMATE SPEED® tension belts, with fastening hooksElastic straps for secure fastening of objects.Dimensions: various dimensions.Sets: 10, 12 or 18 pieces

✓ With stable fastening
hooks ✓ Straps with different tensile forces

ULTIMATE SPEED® tension belts, with fastening hooks
properties

Elastic straps for secure fastening of objects
With sturdy fastening hooks
10 parts: Permissible tensile force: each = 20 N / each = 60 N
10 parts: Permissible tensile force: each = 20 N / each = 70 N
18 parts: Permissible tensile force: each = 20 N / each = 70 N
12 parts: Permissible tensile force: each = 70 N

material

PP, rubber, plastic

weight

10 pieces: approx. 550 g
10 pieces: approx. 560 g
18 pieces: approx. 1020 g
12 pieces: approx. 1000 g

Warning notices

CAUTION! Do not use damaged elastic bands! Do not connect or knot the elastic bands! Do not change or bend the fastening hooks! Protect eyes, face and other unprotected areas of the body from rebound. Keep out of reach of children. Do not use to secure heavy or large loads (exposed to wind forces).

Posted on

ULTIMATE SPEED® vehicle charger »ULGD 5.0«Intelligent microprocessor control with diagnostic program and fully automatic loading processMaterial: PolycarbonateDimensions: approx. 167 x 68 x 50 mm

ULTIMATE SPEED® vehicle charger »ULGD 5.0«
properties

Intelligent microprocessor control with diagnostic program and fully automatic loading process
For all car and motorcycle batteries with 6 V or 12 V and 1.2–120 Ah capacity
4 programs for optimal adaptation to the battery type
LC display for charging programs, voltage value and charging status
Impulse charging to revitalize discharged batteries I
Winter charging mode for low outside temperatures II
Protected against reverse polarity, short circuit and overload
Long-term connection for optimal charge retention without sulfate formation
LEDs for reverse polarity warning and standby mode
Charging current: max. 5 A
Ambient temperature: -20 ° C / + 50 ° C
Cable length: 1 x approx. 1.95 m and 1 x approx. 1.95 m
Operating voltage: 220–240 V ~ 50 Hz
Figure charging principle: Program 3 (14.4 V / 5.0 A)

material

Polycarbonate

Dimensions

approx. 167 x 68 x 50 mm

weight

approx. 510 g

I If the battery voltage is> 7.5 V (for 12 V batteries)
II For 12 V batteries

Posted on

ULTIMATE SPEED® auto start aid with compressor and power bank UPK 10 D14-function power bankbattery: Li-ion battery (14 Ah)Removable pressure: max.3.5 bar

ULTIMATE SPEED® auto start aid with compressor and power bank »UPK 10 D1«
properties
4-function power bank with powerful Li-ion battery (14 Ah)
Including compressor with integrated compressed air hose and digital pressure gauge
Vehicle jump start with immediate start by high current impulse briefly up to 200 A (12 V)
2 USB charging outputs for smartphones, tablets or MP3 players
LED light
Presettable compressor air pressure between 0.3 and 3.5 bar with automatic switch-off when the pressure is reached
Incl. Mains charger, vehicle jump-start cable and 3 compressed air attachments (nozzle, ball needle, adapter for small-volume inflatable items such as armbands)
Protected against reverse polarity, short circuit, overcharging and overheating
Protective circuit for the detection of defective or deeply discharged vehicle batteries for maximum protection of the electronics and the user
Charge status display via 4 LEDs
Vehicle jump starter suitable for petrol engines up to a maximum of 3.5 l displacement and diesel engines up to a maximum of 2.2 l displacement
Pressure selection using the convenient \ pressure preselect function \ “between 0.3 and 3.5 bar
Integrated LED torch suitable for temperatures down to -21 ° C.
Maximum removable pressure 3.5 bar
ULTIMATE SPEED® auto start aid with compressor and power bank »UPK 10 D1«
Warning notices
CAUTION! Pressure gauge not calibrated. It is essential to follow the safety instructions in the operating instructions.

Posted on

ULTIMATE SPEED® child booster seat Isofix, anatomicalHeight: over 125 cmWeight: 22 to 36 kgRecommended age: 6 to 12 years

ULTIMATE SPEED® Isofix child booster seat
properties

With a practical Isofix fastening system
Particularly safe thanks to the direct connection to the car seat
Suitable for all common vehicles with Isofix fastening system
Tested and approved according to ECE 44/04, group 3
Quick installation and removal
Can also be used without the Isofix fastening system thanks to retractable retaining brackets
Anatomically shaped seat
Ensures a child-friendly belt route
Breathable, comfortable outer fabric – lightfast, colourfast and hand washable up to 30 ° C
Suitable for children with a body weight of 22 to 36 kg (approx. 6 to 12 years) and height over 125 cm
ULTIMATE SPEED® Isofix child booster seat
material

Cover: 100% polyester

Dimensions

approx. W 39 x D 34.5 x H 18.5 cm

weight

approx. 7.15 kg

scope of delivery

1x child booster seat

Posted on

ULTIMATE SPEED® rim trolleyFor effortless transport and space-saving storage

properties
For effortless transport and space-saving storage
For 4 complete car wheels up to approx. 46 cm (18 inches) and 255 mm tire width (255/55 R18)
Mobile thanks to 3 castors – with a parking brake
Anti-slip, ergonomically shaped handle
Free space prevents the formation of damaged condensation on tires and rims
Rim-friendly pads
Deformation-free storage even if there is a loss of pressure
Including extensive accessories and instructions
Tire protection cover with practical Velcro fastener
4 colored chips for tire identification
Bag for storing the wheel nuts
Compressed air tester, measuring range 0.7–3.5 bar (10–50 PSI)
Profile depth tester, measuring range 0–20 mm
2 assembly keys
Maximum load: 100 kg
material
Pipes: Q 195 steel
Handle: Thermoplastic Rubber (TPR)
Wheels: polypropylene (PP)
Screws + retaining pins: steel A3
Support plate: plastic polypropylene (PP)
Dimensions
approx. W 124 x H 95.5 x D 121 cm
Tire protection cover: approx. Ø 70 x L 110 cm
weight
Without accessories: approx. 6.9 kg
Including accessories: approx. 7.2 kg

Posted on

ULTIMATE SPEED® polishing machine »UPM 120 B3«, two-handPowerful and powerful orbital oscillator Output: 120 WIdle speed: 3700 rpm

ULTIMATE SPEED® polishing machine »UPM 120 B3«
properties
Powerful and powerful orbital oscillator
For comfortable polishing and sealing of lacquered surfaces
Ergonomic two-hand control
Low noise development
Connected load: 120 W
Idle speed: 3,700 rpm
Power cord length: 5 m

Included accessories: 4 washable polishing hoods (2 x terry towels, 2 x synthetic fur)

material
SECTION

Dimensions
Polishing plate: approx. Ø 25 cm

weight
approx. 2.3 kg

Posted on

ULTIMATE SPEED® semi-garage, -40 to +70 ° CProtect your car from snow and ice as well as dirt, flowers and resinSize: Available in many sizesAttachment: Including 6 elastic straps

ULTIMATE SPEED® semi-garage, weather and temperature resistant
properties
Protects your car from snow and ice as well as dirt, flowers and resin
Made of durable, waterproof and UV-resistant film
Weather and temperature resistant from -40 to +70 ° C
Reinforced eyelets for secure attachment – including 6 elastic straps
Available in other sizes
Dimensions
S / M: approx. W 170 x H 80 x L 265 cm
L / XL: approx. W 180 x H 80 x L 275 cm
Combi: approx. W 180 x H 80 x L 310 cm
Warning notices
CAUTION! Not suitable for long-term coverage. Remove the semi-garage every 3-4 days to check for condensation. Only place on a dry and dust-free trolley. Do not use the protective cover when it is wet or when the vehicle is wet.

Posted on

ULTIMATE SPEED® wheel nut wrench, 2 socket wrenchesFor an easy tire changeIncluding: 2 socket wrenches and storage bag

ULTIMATE SPEED® wheel nut wrench
properties

For a simple tire change
Increased leverage thanks to the adjustable handle bar – also loosens stuck screws
Rotatable handle for effortless unscrewing without changing your grip
With mounting lever – for quick removal of hubcaps
Can be dismantled to save space
Including 2 socket wrenches (17/19 and 21/23 mm) and storage bag

Posted on

ULTIMATE SPEED® car mobile phone holder, with suction cup, 360 °Adjustable holder – suitable for all common smartphonesSpecial feature: Can be rotated 360 °Suitable for: Smartphones with a width of approx. 58-84 mm

ULTIMATE SPEED® car mobile phone holder, with suction cup
properties
Adjustable holder – suitable for all common smartphones
For smartphones with a width of approx. 58-84 mm
Secure hold thanks to a strong suction cup vacuum system
Can be rotated 360 ° – ideal e.g. B. for navigation functions in landscape format
3-point mounting for high stability against vibrations
Convenient one-hand operation
Including instructions
material
Acrylonitrile butadiene styrene copolymer (ABS)

Dimensions
approx L 17 cm

weight
approx. 115 g

Exit mobile version