The best source of information about products. It's EverGreen!
ULTIMATE SPEED® tether straps
properties
Stable, galvanized ratchets with quick release
Complies with DIN EN 12195-2
Lashing length approx. 3.75 m each – total length approx. 4 m each
2 pieces
Permissible lashing force (LC): per 1000 daN (kg)
With two steel claw hooks each
4 pieces
Permissible lashing force (LC): each 350 daN (kg)
With two steel S-hooks each
material
PE, steel
Dimensions
Lashing length approx. 3.75 m each
ULTIMATE SPEED® vehicle jack stand for two
properties
Load capacity up to 2000 kg
Large contact surface for optimal load absorption
Height adjustable in 6 levels: approx. 24 / 26.7 / 29.5 / 32.2 / 35 / 37.7 cm
3 footrests each for a secure stand
With bolt chain safety device
Can be folded up to save space
2 pieces
Dimensions
each trestle approx. W 9.2 x H 28 x D 9 cm
Weight
approx. 3.3 kg (set)
properties
For effortless transport and space-saving storage
For 4 complete car wheels up to approx. 46 cm (18 inches) and 255 mm tire width (255/55 R18)
Mobile thanks to 3 castors – with a parking brake
Anti-slip, ergonomically shaped handle
Free space prevents the formation of damaged condensation on tires and rims
Rim-friendly pads
Deformation-free storage even if there is a loss of pressure
Including extensive accessories and instructions
Tire protection cover with practical Velcro fastener
4 colored chips for tire identification
Bag for storing the wheel nuts
Compressed air tester, measuring range 0.7–3.5 bar (10–50 PSI)
Profile depth tester, measuring range 0–20 mm
2 assembly keys
Maximum load: 100 kg
material
Pipes: Q 195 steel
Handle: Thermoplastic Rubber (TPR)
Wheels: polypropylene (PP)
Screws + retaining pins: steel A3
Support plate: plastic polypropylene (PP)
Dimensions
approx. W 124 x H 95.5 x D 121 cm
Tire protection cover: approx. Ø 70 x L 110 cm
Weight
Without accessories: approx. 6.9 kg
Including accessories: approx. 7.2 kg
ULTIMATE SPEED® hubcap set of 4
properties
4 pieces per set
Corrosion Resistant
Spring steel ring 3-way adjustable with special valve recess
Suitable for all common cars with steel rims
Impact-resistant and break-proof
material
Polypropylene
Dimensions
silver, glossy black: 14 inches
silver, silver-black-matt: 15 inches
silver: 16 in
ULTIMATE SPEED® vehicle charger with jump start function »ULG 17 A1«
properties
Direct engine start when the battery is weak without lengthy charging
For car and motorcycle batteries with 12 V or 6 V and 8–250 Ah capacity
Program selection for recharging with optimal adaptation to the battery type
Alternator tester to test performance
Protected against reverse polarity, short circuit and overload
Intelligent microprocessor control with diagnostic program and controlled charging process
Temperature sensor for adapting the charging characteristic at low temperatures
Pulse charging mode for revitalizing empty batteries
Long-term connection for optimal charge retention without sulfate formation
LC display for charging process, voltage value and state of charge
Automatic battery detection with display when the battery is defective
Lateral charging cable holder for tidy storage
Suitable for all lead-gel and lead-acid batteries
Technical specifications
Operating voltage: 230 V ~ 50 Hz
Charging currents: 2/6/17 A.
Direct start current pulse: approx. 75 A / 12 V
Dimensions
approx. W 32 x L 28.5 x D 13.5 cm
Weight
approx. 6.5 kg
ULTIMATE SPEED® doormat set 4 pieces
properties
2x front floor mats
2x rear floor mats
Anti-slip knobs on the back
easy to clean
cannot be cut to size
material
Aluminum, polyvinyl chloride (PVC)
Dimensions
left front floor mats: approx. 65 x 46 cm right front floor mats: approx. 67 x 48 cm rear floor mats: approx. 33 x 45 cm
Weight
approx. 3000 g (set)
ULTIMATE SPEED® seat cover cooling
properties
Particular comfort through active ventilation of the back and seat area
Suitable for all common car seats
2 fans for ventilation of the backrest
1 fan for the seat
Infinitely adjustable ventilation strength
Simple operation via cigarette lighter adapter (12 V) with indicator light
Quick and non-slip attachment thanks to adjustable brackets and elastic rubber bands
Also suitable for seats with side airbags
material
100% polyester
Dimensions
Cable length (including connector): approx. 1.3 m
ULTIMATE SPEED® car seat cover
properties
For 2 front seats, 1 rear bench and 5 headrests
Quick and easy assembly:
Front seats with rubber straps and hooks for quick attachment
Flexible mounting strip for front seat headrest guides
Zipper for front seat headrest guides
The rear seat bench can be easily covered with an elastic band
Universal size – also suitable for divisible rear seat backrests
Also suitable for seats with side airbags
Washable, lightfast and colourfast
Protects the original upholstery from dirt and wear and tear
14 pieces
material
100% polyester
Weight
approx. 595 g
ULTIMATE SPEED® car cup holder
properties
Back seat organizer
With two compartments for storing pens, smartphones, sunglasses and much more
Simple, height-adjustable attachment to the headrest
Car seat cup holder
Simple attachment between the front seats
With 2 holders for drinks and 1 universal compartment for smartphone, sunglasses or parking card
Double cup holder
Comfortable, practical organizer
Suitable for beverage cans, bottles or coffee mugs
Simple attachment to the existing cup holder – for two drinks at the same time
Including instructions
material
polyester
Dimensions
Rear seat organizer: approx. L 20 x W 9 x H 8.5 cm
Car seat cup holder: approx. L 27.6 x W 10 x H 20.7 cm
Double cup holder: approx. L 16.5 x W 8 x H 10 cm
