Tag: Charger

Posted on

ULTIMATE SPEED Electronic charger with display »ULGD 5.0 C1«, 1.2 – 120 Ah
Charging current: max. 5 A
Battery capacity: 1.2-120Ah
Charging programs: 4

ULTIMATE SPEED Electronic charger with display »ULGD 5.0 C1«, 1.2 – 120 Ah
Product description

intelligent microprocessor control system with diagnostic program and fully automatic charging
for all 6 V or 12 V batteries with a capacity of 1.2-120 Ah installed in passenger cars and motorcycles
4 programs ensure optimal adaptation to the battery type
LCD display for charging programs, voltage values and state of charge
all-round insulated pole terminals
impulse charging to re-energize discharged batteries (with battery voltage >7.5 V (for 12 V batteries))
winter charging mode for low outdoor temperatures
protected against reverse polarity, short circuit and overload
the applied connector ensures optimal charging maintenance without sulphation
LEDs for polarity reversal warning and standby
for batteries with a capacity of 1.2-120 Ah
ambient temperature: -20°C / +50°C
connecting cable length: 2 m
network cable length: 2 m

Technical data

charging current: max. 5 A
operating voltage: 220-240V~ 50Hz

Dimensions

approx. 16.7 cm x 6.8 cm x 5 cm (L x W x H)

Libra

approx. 0.5 kg

Posted on

ULTIMATE SPEED Electronic rectifier ULGD A1, 10 A
Charging current: max. 10A / 5A
Charging programs: 8
temp. ambient: -20 °C / + 50 °C

ULTIMATE SPEED Rectifier ULGD A1, 10 A
Product description

Intelligent microprocessor control system with diagnostic program and fully automatic charging
For all 12 V or 24 V and 20-300 Ah batteries
8 selectable charging modes for optimal adaptation to the battery type
2 power supply programs when replacing the battery
LCD display for charging programs, voltage values and state of charge
Pulse charging to re-energize discharged batteries*
Winter charging mode for low outside temperatures**
Protected against reverse polarity, short circuit and overload
The connection ensures optimum maintenance of charging without sulphation
Cable length: 1 x approx. 2.20 m and 1 x approx. 1.80 m

Technical data

voltage: 220-240V ~ 50-60Hz
charging current: max. 10 A (12 V) / max. 5 A (24 V)
ambient temperature: -20 °C / + 50 °C

Material

material

Dimensions

approx. 22.2 x 10.4 x 5.8 cm

Libra

approx. 805 g

  • When battery voltage >2 V is still present (for 12 V batteries)

** For 12V and 24V battery

Posted on

ULTIMATE SPEED Jumpstarter with 12,000 mAh power bank
Capacity: 12000mAh
Max. current: 500 A
Battery charging time: max. 13.5 hours

ULTIMATE SPEED Jumpstarter with 12,000 mAh power bank
Product description

2 in 1: car jump starter and powerful power bank
protected against reverse polarity, short circuit and overload
spark-proof device
modern lithium-ion technology with a powerful LiFePO4 battery
high electronic efficiency – up to 90% of usable battery capacity*
high cycle life for exceptionally long service life
very low self-discharge value
direct start with a high current pulse (approx. 500 A / 12 V) – no cumbersome recharging
12,000 mAh power bank with 2 USB outputs (1A / 2A) and USB C input (5V / 1A)
charge indicator using 4 LEDs
integrated LED flashlight with flashing function
starting aid designed for petrol and diesel engines
in a practical bag

Included: 12V adapter, jumper cable and 3-way USB cable for charging mobile phones or tablets with micro-USB / mini-USB / or USC-C connector

Technical data

capacity: 12000mAh
LiFE Po4 technology
short-term max. starting current: 300 A
maximum current: 500 A
2x USB outputs, total output current 3 A
battery charging time: max. 13.5 hours
input current: 1 A at 5 V,
capacity: 12000 mAh at 3.2 V, 7000 mAh at 5 V, 3000 mAh at 12 V

Material

material

Dimensions

approx. 16.3 x 9.4 x 4.2 cm

Libra

approx. 530 g

*Compared to traditional Li-Ion LiCoO2 cells

Posted on

PARKSIDE 12V battery charger »PLGK 12 A3«, 2.4 A
From our PARKSIDE X 12 V Team
series Rated input : 50 W Charging
current: 2.4 A

PARKSIDE® 12V battery charger »PLGK 12 A3«, 2.4 A
Characteristics

With automatic charge cut-off and LED charging indicator
With integrated wall bracket and rubber nubs for slip resistance
With automatic charging switch-off
Compatible with all batteries from the PARKSIDE X 12 V Team series

Technical specifications

Rated consumption: 50 W
Charging Current: 2.4A
Charging time (at 12 V / 2 Ah): approx. 60 min
Charging time (at 12 V / 4 Ah): approx. 120 min

material

plastic, fiberglass

Dimensions

Device: approx. 12.2 x 9.3 x 5.2 cm
Power Cord Length: About 2m

weight

approx. 275 g

Posted on

TRONIC battery charger with LCD charge indicator
Battery type: AA / AAA
Charging time: approx. 6.5 / 5.5 hours

TRONIC® battery charger with LCD charge indicator
Characteristics

With LC display and 4 batteries
Illuminated charge status indicator for batteries
Minus-Delta-U shutdown, timer function and short-circuit protection
With additional USB output
Charges batteries and USB devices simultaneously
AA:
Incl. 4 rechargeable batteries (type AA, AA mignon, NI-MH, 1.2 V, 2400 mAh, HR6, HRMR 15/51, gas-tight)
Charging time: approx. 6.5 hours (depending on the cell capacity with 4 x AA 2400 mAh battery)
The device can charge NI-MH AAA batteries
AAA:
Incl. 4 rechargeable batteries (type AAA Micro, Ni-MH, 1.2 V, 900 mAh, HR03, HRMR 11/45, gas-tight)
Charging time: approx. 5.5 hours (depending on the cell capacity with 4 x AAA 900 mAh battery)
The device can charge NI-MH AA batteries

material

plastic

Dimensions

approx. 67.9 x 121.6 x 68.1 mm

weight

about 128g

scope of delivery

1x charger

Posted on

TRONIC universal battery charger with display TAL 1000 A1
Simultaneous charging of up to 8 batteries
Suitable for NiMH and NiCd batteries

NO OVERCHARGING OF BATTERIES AA/AAA/C/D /9 V BLOCK 
Characteristics:

Minus Delta U shutdown – no overcharging of the batteries possible (AA/AAA/C/D/9 V block)
Simultaneous charging of up to 8 batteries
Suitable for NiMH and NiCd batteries
Charge status display via LC display
Charging slots with LED status display of the charging programs
Intelligent charging control with individual slot monitoring and refresh function for consistently high battery performance
With timer switch-off after 17 hours
Reverse polarity protection and automatic battery detection
Charging programs: refresh function, pre-charging, charging and trickle charging
Dimensions: 17.0 x 5.5 x 15.3 cm (W x H x D)

Posted on

PARKSIDE 12V battery double charger »PDSLG 12 A2«, 4.5 A
Charging current: 2 x 4.5 A
Power: 150 W

Gehe zu Vollbildansicht: PARKSIDE 12V Akku-Doppelladegerät »PDSLG 12 A2«, 4,5 A - Bild 1

PARKSIDE 12V battery double charger »PDSLG 12 A2«, 4.5 A
Characteristics

For charging 2 batteries at the same time – even with different capacities
With automatic charge cut-off and LED charging indicator
Underside with anti-slip nubs
With integrated wall bracket
Compatible with all devices in the PARKSIDE X 12 V Team series
Battery not included

Technical specifications

Charging Current: 2 x 4.5A
Rated consumption: 150 W
Loading time:
12 V / 2 Ah (PAPK 12 A1): approx. 60 min
12 V / 2 Ah (PAPK 12 A2 / A3): approx. 45 min
12 V / 4 Ah (PAPK 12 B3): approx. 60 min
12 V / 5 Ah (PAPK 12 D1): approx. 80 min

material

fiberglass, plastic

Dimensions

Power Cord Length: About 2m
Device: approx. 21 x 13.1 x 5.5 mm

weight

about 633g

Posted on

TRONIC »TKHU 2 A2« car smartphone holder, USB, with Smart Fast Charge function
Connections: USB-A and USB-C
Output power: 15 W
Output voltage 5 V / max. 3 A

✓ USB-A output with Smart Fast Charge function
✓ For easy attachment to the ventilation slots
✓ Variably adjustable side clamps

Characteristics

USB-A output with Smart Fast Charge function for optimized charging time
Flexible smartphone holder for easy attachment to the air vents
Rubberized inside for an optimal grip
Variably adjustable side clamps
For all common smartphones with a width of min. 5 cm and max. 9 cm
Integrated fuse, short-circuit protection and over-voltage protection
USB charging plug with a practical bracket for quick release from the charging socket

Accessories included: 12/24V USB charging plug, micro USB cable with USB-C adapter

Technical specifications

12/24 V USB charging connector with 1x USB-A and 1x USB-C output
Output voltage/current (total): 5 V / max. 3 A
USB-C: 5V / max 3A
USB-A: 5V / max 2.1A
Output power (total): max. 15 W

material

plastic

Dimensions

Smartphone holder: approx. 9.4 x 11.2 x 13.5 cm (with air vent clamp)
USB adapter: approx. 3.5 x 3.1 x 5.9 cm

weight

Bracket: approx. 91.3 g (with air vent clamp)
USB Adapter: Approx. 20.3g

Posted on

TRONIC battery charger with LCD charge indicator
Battery type: AA / AAA
Charging time: approx. 6.5 / 5.5 hours

Characteristics

With LC display and 4 batteries
Illuminated charge status indicator for batteries
Minus-Delta-U shutdown, timer function and short-circuit protection
With additional USB output
Charges batteries and USB devices simultaneously
AA:
Incl. 4 rechargeable batteries (type AA, AA mignon, NI-MH, 1.2 V, 2400 mAh, HR6, HRMR 15/51, gas-tight)
Charging time: approx. 6.5 hours (depending on the cell capacity with 4 x AA 2400 mAh battery)
The device can charge NI-MH AAA batteries
AAA:
Incl. 4 rechargeable batteries (type AAA Micro, Ni-MH, 1.2 V, 900 mAh, HR03, HRMR 11/45, gas-tight)
Charging time: approx. 5.5 hours (depending on the cell capacity with 4 x AAA 900 mAh battery)
The device can charge NI-MH AA batteries

material

plastic

Dimensions

approx. 67.9 x 121.6 x 68.1 mm

weight

about 128g

scope of delivery

1x charger

Posted on

20V Battery Charger PLG 20 C1

Files

User manual 1

Brand Name

Parkside

EAN

  • 4052916034606

IAN

385584

Product description

  • Charger PLG 20 C1
  • With automatic charge switch-off and LED charging indicator light
  • With anti-slip base
  • With an integrated wall bracket (mounting material not included)

Parts description
[1] Battery pack*
[2] Power cord with power plug
[3] Charger
[4] Charging control LED – Red
[5] Charging control LED – Green

  • Battery pack not included
    Technical data
    Charger: PLG 20 C1
    Input:
    Rated voltage: 230–240 V∼
    Rated frequency: 50 Hz
    Rated power consumption: 65 W
    Fuse (internal): 3,15 A T3.15A
    Output:
    Rated voltage: 21.5 V
    Rated current: 2.4 A