The best source of information about products. It's EverGreen!
properties
Charging the battery via mains connection or micro-USB input
Powerful with 5200 mAh lithium-ion battery
Simultaneous charging of the power bank and the smartphone is possible
1x micro USB input
2 x USB-A output
Battery status display via 4 LEDs
Incl. EU, UK and US plugs
Output power: max. 5 V / 2.1 A
Dimensions
approx. W 75 x H 72 x D 31 mm
ULTIMATE SPEED® vehicle charger ULGD 5.0 B1
properties
Intelligent microprocessor control with diagnostic program and fully automatic loading process
For all car and motorcycle batteries with 6 V or 12 V and 1.2–120 Ah capacity
4 programs for optimal adaptation to the battery type
Impulse charging to revive discharged batteries *
Winter charging mode for low outside temperatures **
Protected against reverse polarity, short circuit and overload
Long-term connection for optimal charge retention without sulfate formation
LEDs for reverse polarity warning and standby mode
Powerful 2 Ah battery with charger suitable for devices from the “Parkside X 20 V” series
20 V (2 Ah) lithium-ion battery
Powerful lithium-ion battery with 3-stage charge status indicator
Including 60-minute quick charger with automatic charge cut-off
Compatible with all devices of the “PARKSIDE X 20 V Team” series
OUR TIP:
To check the battery status, press the “Battery status” button. The status or
the remaining power is shown in the battery display LED as follows:
♦ RED / ORANGE / GREEN = maximum charge
♦ RED / ORANGE = medium charge
♦ RED = weak charge – charge the battery
Double quick charger »PDSLG 20 A1«
properties
For simultaneous charging of 2 batteries – also with different capacities
With automatic charge cut-off and 3-stage battery status display
Also suitable for wall mounting (material for wall mounting not included)
Compatible with all batteries of the “PARKSIDE X 20 V Team” series
Batteries not included
Technical specifications
Rated input: 200 W
Max. Charging current: 2 x 4.5 A
Charging time 2 Ah / 4 Ah: approx. 30 min (ready to use) / approx. 60 min
Power cord length: 2 m
material
Polyamide, glass fiber (PA6 + GF30)
Dimensions
approx. 25 x 14.5 x 8.7 cm
Weight
970 g
Charger compatible with all batteries of the “PARKSIDE X 20 V Team” series
With automatic charge cut-off and LED charge indicator
Power cord length: 1.5 m
Device compatible with all batteries of the “PARKSIDE X 20 V Team” series
Delivery without battery
PARKSIDE charger »PLG 20A1«
properties
60-minute quick charger
With automatic charge cut-off and LED charge indicator
Device compatible with all batteries of the “PARKSIDE X 20 V Team” series
Delivery without battery
SILVERCREST charger, inductive
properties
For wireless charging of Qi-compatible devices
With LED indicator light
Supports all Qi-enabled devices (including Samsung Galaxy S10 / S10 Plus / Note 8 / Apple iPhone 8 / iPhone 8 Plus / iPhone X / iPhone Xs and many more)
Stand function:
Vertical and horizontal use of smartphones possible when charging
Practical stand function for storing the smartphone while charging
2 induction coils
Inclination:
Practical inclination for storing the smartphone while charging
Silicone ring for non-slip hold of the smartphone
1 induction coil
Without smartphone
Technical specifications
Charging current: max. 10W I
Input: USB-C
I When using a 10W power adapter (not included)
Dimensions
Stand function: approx. L 14 x W 7 x H 1 cm
Inclination: approx. Ø 9 x H 4 cm
scope of delivery
Inductive charger
USB-A 2.0 to USB-C charging cable (length: approx. 1 m)
Lithium-ion battery and charger with LED charging indicator
Powerful lithium-ion battery
Charger with LED charging indicator and automatic charge cut-off
Battery compatible with all devices of the “PARKSIDE X 12 V Team” series
All compatible devices of our 12 volt series can be found here:
Technical specifications
Battery »PAPK 12 A2«:
Type: lithium ion
Rated voltage: 12 V.
Capacity: 2 Ah
Charging time: approx. 60 minutes (12 V / 2 Ah)
Charger »PLGK 12 A2«:
Rated power: 50 watts
Charging current: 2.4 A.
IC protection functions
material
Housing: polyamide 6 (PA6 + GF30)
Dimensions
Battery: approx. 82 x 52.3 x 47.7 mm
Charger: approx. 117 x 52 x 96 mm
Weight
Battery: approx. 180 g
Charger: approx. 226 g
properties
Easy to use without a charging cable
With “Smart Fast Charge” for optimized charging time
For all Qi-enabled mobile devices e.g. For example: iPhone X, iPhone XR, iPhone 8/8 Plus, Samsung Galaxy S8 / S8 Plus, S7 / S7 Edge, Note 8 and other Qi-supported smartphones
Powerful 8,000 mAh Li-polymer battery
Additional USB output incl. 2-in-1 cable for charging devices with micro USB or USB-C connection
Rubberized ring to prevent slipping
Overheating, overcharge, deep discharge and short circuit protection
Charge status display via 4 LEDs
No more cable chaos! – just put your smartphone down and charge it
Smart Fast Charge: technology to optimize charging time. Li-polymer technology: no memory effect. Low self-discharge. Constantly high performance. Efficient and environmentally friendly. Smartphone not included.
Technical specifications
Dimensions: approx. 14.5 x 7.2 x 1.7 cm
Input voltage / current: Micro USB: 5 V / 2.1 A; USB type C: 5 V / 3 A
Output voltage / current: USB type A: 5 V / 2.1 A; USB type C: 5 V / 3 A; wireless: 5 V / 1 A
Cable length: approx. 45 cm
Powerful lithium-ion battery with charger
properties
Powerful 20 V lithium-ion battery (2 Ah) with 3-stage charge status display
Including 60-minute quick charger with automatic charge cut-off (2 Ah battery charged in 60 minutes)
Compatible with all devices of the “PARKSIDE X 20 V Team” series
OUR TIP: To check the battery status, press the “Battery status” button. The status or the remaining power is shown in the battery display LED as follows:
RED / ORANGE / GREEN = maximum charge
RED / ORANGE = medium charge
RED = weak charge – charge the battery
All compatible devices of our 20 volt series can be found here:
Technical details
Battery 2 Ah »PAP 20 A1«:
Type: lithium ion
Rated voltage: 20 V
Capacity: 2 Ah
Charger »PLG 20 A1«:
Rated power: 65 watts
Rated current: 2.4 A
material
Polyamide 6 (PA6 + GF30)
Thermoplastic elastomer (TPE)
Dimensions
Battery: approx. 127 x 52 x 84 mm
Charger: approx. 140 x 84 x 68 mm
Weight
Battery: approx. 440 g
Charger: approx. 315 g
