PARKSIDE compressed air pipe cleaner »PPR 4 B2« with air drain screw properties Quick help with blocked drains in sinks, bathtubs, showers, toilets etc. Environmentally friendly cleaning without the use of chemicals High pressure build-up through simple pumping With air drain screw Incl. 2x sink / washbasin attachment, 1x toilet attachment, 1x shower attachment and 1x overflow seal 6 pieces material Housing: acrylonitrile / butadiene / styrene (ABS) Attachments: polyvinyl chloride (PVC) Overflow seal: polypropylene (PP), ethylene vinyl acetate (EVA) Ergonomic handle: thermoplastic rubber (TPR) Dimensions Pipe cleaner: approx. 9.1 x 27.2 x 28.1 cm 4 attachments: approx. Ø 20.1 / 11.1 / 6.2 / 5.1 cm Overflow seal: approx. 7.4 x 3.9 x 5.3 cm Weight Pipe cleaner: approx. 425 g 4 attachments: approx. 397 g Overflow seal: approx. 16 g
PARKSIDE compressed air sandblasting gun »PDSP 1000 D5«, including attachments properties Ideal for removing paint, varnish, rust and stubborn dirt Adjustable flow of blasting material Suitable for all common abrasives with a grain size of 0.21-0.35 mm (grain size 40-60) Incl. Attachments for the efficient processing of large and small areas and edges Recommended compressor: from 50 liters tank volume Included accessories: 1 collection bag with screw clamp, 1 connection nipple (pre-assembled), 1 surface, point, edge and inner corner attachment each, 2 x 1 kg of blasting material (aluminum oxide) in grain size 0.21-0.35 mm (grain size 40-60 ) Technical specifications Air consumption: max. 320 l / min Blasting material tank: approx. 0.9 l Working pressure: max. 6.3 bar material Housing: acrylonitrile / butadiene / styrene (ABS), polyethylene (PE) Clamp: iron Sack: fabric Attachments: polyvinyl chloride (PVC) Dimensions approx. 254 x 288 x 108 mm Weight Sandblasting gun: approx. 432 g Attachments (4 pieces): approx. 171 g 2 blasting material container: approx. 2,086 g Clamp: approx. 20 g Collection bag: approx. 20 g
PARKSIDE compressed air sheet metal nibbler »PDNB 6.3 B2« / compressed air needle scaler »PDNE 4000 B2« properties Recommended compressor: from 50 liters tank volume Sheet metal nibbler: For precise cutting of metal and other sheet metal Particularly suitable for clean straight and curved cuts with low material waste Also ideal for cuts with a small radius (min.5.5 mm) Safety switch with switch-on lock Robust housing made of powder-coated aluminum Included accessories: 1 nipple ¼ “with sealing ring (pre-assembled) Needle scaler: Ideal for the coarse removal of paint, rust and stubborn dirt With 19 steel needles Integrated pressure regulator Robust housing made of powder-coated aluminum Anti-slip soft grip Accessories included: 1 nipple ¼ “with sealing ring (pre-assembled), 1 Allen key, 1 oil container Technical specifications Sheet metal nibbler: Rated speed: max. 2600 rpm Max. Working pressure: 6.3 bar Max. Cutting capacity: 1.2 mm in sheet metal / 1.6 mm in aluminum Cutting width: 5.5 mm Needle scaler: Number of strokes: max. 4000 rpm Working pressure: max. 6.3 bar Dimensions of steel needles: each Ø 3 x L 180 mm material Sheet metal nibbler: Housing: aluminum, powder-coated Nibbling block: alloy steel Nibbling stamp: steel Needle scaler: Aluminum, powder-coated Needle: steel Dimensions Tin nibbler: approx. 23 x 10.1 x 4.1 cm Needle scaler: approx. 34.5 x 18.7 x 5 cm Weight Sheet metal nibbler: approx. 887 g Needle scaler: Device (without accessories): approx. 2080 g Allen key: approx. 9 g
Compressed air accessory set for bicycles, air mattresses, balls and much more Universally applicable for bicycles, air mattresses, balls and much more Blow gun including 2 extension nozzles Filling pistol with vent valve and pressure indicator Suitable for standard compressors Max. Working pressure: 8 bar Hose with valve plug and various adapters Set contents: 1 blow gun and 2 nozzles, 1 filling gun with valve connector hose, 7 adapters plus adapter attachment material
Tire inflation gauge: approx. 250.5 x 80.5 x 32 mm Hose length: approx. 42 cm Blow gun: approx. 148 x 78 x 18.4 mm Ball valve adapter: approx. 4.5 x 0.8 x 0.25 cm Bicycle valve adapter: approx. 2.8 x 0.8 x 1.9 cm Valve adapter 1: approx. 4.4 x 0.8 x 1 cm Valve adapter 2: approx. 3 x 0.8 x 0.6 cm Nozzle adapter for 3 pieces. Nozzle set: approx. 3.24 x 0.78 x 3.27 cm 3-part Nozzle set: approx. 1 x 9 x 3.2 x 0.5 cm, 1 x 5.3 x 3.2 x 1.7 cm, 1x 5 x 3.2 x 2.2 cm Nozzle for blow gun 1: approx. 10.16 x 0.97 x 0.46 cm Nozzle for blow gun 2: approx. 5.77 x 0.97 x 0.46 cm Weight Tire inflation gauge: about 227 g Blow gun: approx. 100 g Ball valve adapter: approx. 4.1g Bicycle valve adapter: approx. 21 g Valve adapter 1: approx. 9.1 g Valve adapter 2: approx. 9.2 g Nozzle adapter to 3-piece set: approx. 10.3 g 3-piece nozzle set: approx. 25 g Nozzle 1: approx. 12 g Nozzle 2: approx. 9.3 g
PARKSIDE hose reel compressed air with bracket frame properties Suitable for all common compressed air devices with standard coupling High quality compressed air hose Plug-in nozzle and one-hand quick-release coupling made of brass Bracket frame made of powder-coated tubular steel with hose guide Increased stability through reinforced drum discs Technical specifications Operating pressure: max. 16 bar (at 23 ° C) / max. 11 bar (at 60 ° C) material Drum: polypropylene (PP) Hose: polyvinyl chloride (PVC) with fabric insert Fittings: brass Frame: steel, powder-coated Dimensions Overall: approx. 22 x 27.5 x 34 cm Hose outside / inside: approx. Ø 11.3 / 6.3 mm Hose length: approx. 20 m Weight approx. 3.1 kg
PARKSIDE compressed air hose »PDS 10 A2« with fabric insert properties Suitable for all common compressed air devices with standard coupling High quality compressed air hose with fabric insert Plug-in nozzle and one-hand quick-release coupling made of brass Connection of several hoses possible Technical specifications Working pressure: max. 16 bar (at 23 ° C), max. 11 bar (at 60 ° C) material Hose: polyvinyl chloride (PVC) with fabric insert Fittings: brass Press sleeve: brass, coated Dimensions Hose: approx. L 10 mx Ø 11.3 mm Inner diameter: approx. Ø 6.3 mm Weight approx. 1.03 kg
5 compressed air devices for impact screwing, screwing, chiseling, grinding and blowing out 1 pneumatic impact wrench with 4-stage adjustable impact performance and square holder (½ “) 1 pneumatic ratchet screwdriver with square socket (½ “) 1 pneumatic chisel hammer with round shank tool holder (10 mm) 1 compressed air rod grinder with 2 attachment shafts (3 mm / 6 mm) 1 compressed air blow gun with continuous dosing 66-piece compressed air accessories including various adapters, assembly tools, thread sealing tape and oil 8x CRV nuts – 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 17mm, 19mm 1x 4mm hex key 1x adapter 1/2 “to 3/8” 1x adapter 1/2 “to 1/4” 9x 25mm screwdriver bits (2x PH2, 1x PH3, T10, T15, T20, 2x 5, 6.5) 1x spring 3x 120mm picks, HRC 42-48 5x grinding bits, shaft diameter 3.2mm 5x grinding bits, shaft diameter 6mm 1x 6mm grinding arbor 10x sanding belt 1x 1/8 “collet 2x spanners for the DL rod grinder 5x 1/4 “plug nipple (external thread) 1x 1/4 “plug (internal thread) 1x 1/4 “quick coupling 2x ball needles 1x ball needle adapter 1x ball nozzle for deflating 1x inflation gun adapter 1x inflation nozzle 1x rubber inflation nozzle 1x conical nozzle 1x oil bottle 1x thread sealing tape 1x storage case according to LIDL guideline Technical details
DL impact wrench Max working pressure: 6.3 bar Min. Working pressure: 4.2 bar Air consumption: 350 l / min Mount: drive square 1/2 “ Release / torque: max. 310 Nm DL ratchet Max working pressure: 6.3 bar Torque: 61 Nm Speed: 160 / min Air consumption: 400 l / min Tool connection: 1/2 inch DL chisel hammer Working pressure: max. 6.3 bar Mount: 10.2 mm hex (optionally also round shank) Number of blows: 4,500 min 41 mm stroke (theoretical travel) Air consumption 460 l / min. at 6.3 bar DL rod grinder recommended working pressure: 6.3 bar Speed: 20,000 rpm Air consumption: 198 l / min (at 4bar) Collet size: 6.35 mm (pre-assembled) DL blow gun Dosing continuously material
DL impact wrench: powder-coated aluminum DL ratchet: powder-coated aluminum DL chisel hammer: powder-coated aluminum DL rod grinder: powder-coated aluminum Accessories: metal with various surface coatings Case: hard polyethylene (HDPE) Dimensions
DL impact wrench: approx. 221 x 194 x 66.5 mm DL ratchet: approx. 285 x 62 x 41 mm DL chisel hammer: approx. 183.5 x 123.5 x 49.5 mm DL rod grinder: approx. 194 x 70 x 42.2 mm Case: approx. 400 x 302 x 110 mm Weight
DL impact wrench: approx. 2040 g DL ratchet: approx. 1226 g DL chisel hammer: approx. 1090 g DL rod grinder: approx. 575 g Accessories: approx. 1566.2 g Case: approx. 1320 g
5-piece set for applying lacquers and paints, for blowing out and for air filling Suitable for standard compressors Low pressure paint spray gun with adjustable spray 8 bar spray gun for fast work progress Blow gun with fine nozzle Tire inflator with pressure gauge * Spiral hose with 5 mm inner diameter and ¼ \ quick coupling (6.35 mm)
Not suitable for filling car tires
Technical specifications
Compressed air paint spray gun Process: low pressure technology Ink cup volume: 1000 ml Max. Working pressure: 5 bar Compressed air spray gun Ink cup volume: 900 ml Max. Working pressure: 8 bar Compressed air blow gun Max. Working pressure: 5 bar Pneumatic tire inflator Max. Working pressure: 6 bar Compressed air hose Length: 5 m Max. Working pressure: 8 bar material
Metal suction cup paint spray gun: die-cast aluminum + aluminum cup Universal suction cup spray gun: die-cast aluminum + steel cup Tire inflator with pressure display: die-cast aluminum Blow gun: Die-cast aluminum Dimensions
Metal suction cup paint spray gun: approx. 149 x 181 x 17 mm Universal suction cup spray gun: approx. 137 x 134 x 16.5 mm Tire inflator with pressure display: approx. 146 x 82 x 19 mm Blow gun: approx. 137 x 91 x 16 mm Compressed air hose: approx. 5 m Weight
Metal suction cup paint spray gun: approx. 350 g Universal suction cup spray gun: approx. 453 g Tire inflator with pressure display: approx. 279 g Blow gun: approx. 123 g Compressed air hose: approx. 188 g
Compressed air hose with reinforced drum disks for increased stability
Suitable for all common compressed air devices with standard coupling Push-in grommet and one-hand quick-release coupling made of brass Temple frame made of powder-coated tubular steel with hose guide Operating pressure: max. 16 bar (at 23 ° C) Operating pressure: max. 11 bar (at 60 ° C) High quality compressed air fabric hose
5 compressed air devices for impact screwing, screwing, chiseling, grinding and blowing out 1 pneumatic impact wrench with 4-stage adjustable impact performance and square holder (½ “) 1 pneumatic ratchet screwdriver with square socket (½ “) 1 pneumatic chisel hammer with round shank tool holder (10 mm) 1 compressed air rod grinder with 2 attachment shafts (3 mm / 6 mm) 1 compressed air blow gun with continuous dosing 66-piece compressed air accessories including various adapters, assembly tools, thread sealing tape and oil 8x CRV nuts – 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 17mm, 19mm 1x 4mm hex key 1x adapter 1/2 “to 3/8” 1x adapter 1/2 “to 1/4” 9x 25mm screwdriver bits (2x PH2, 1x PH3, T10, T15, T20, 2x 5, 6.5) 1x spring 3x 120mm picks, HRC 42-48 5x grinding bits, shaft diameter 3.2mm 5x grinding bits, shaft diameter 6mm 1x 6mm grinding arbor 10x sanding belt 1x 1/8 “collet 2x spanners for the DL rod grinder 5x 1/4 “plug nipple (external thread) 1x 1/4 “plug (internal thread) 1x 1/4 “quick coupling 2x ball needles 1x ball needle adapter 1x ball nozzle for deflating 1x inflation gun adapter 1x inflation nozzle 1x rubber inflation nozzle 1x conical nozzle 1x oil bottle 1x thread sealing tape 1x storage case according to LIDL guideline Technical details
DL impact wrench Max working pressure: 6.3 bar Min. Working pressure: 4.2 bar Air consumption: 350 l / min Mount: drive square 1/2 “ Release / torque: max. 310 Nm DL ratchet Max working pressure: 6.3 bar Torque: 61 Nm Speed: 160 / min Air consumption: 400 l / min Tool connection: 1/2 inch DL chisel hammer Working pressure: max. 6.3 bar Mount: 10.2 mm hex (optionally also round shank) Number of blows: 4,500 min 41 mm stroke (theoretical travel) Air consumption 460 l / min. at 6.3 bar DL rod grinder recommended working pressure: 6.3 bar Speed: 20,000 rpm Air consumption: 198 l / min (at 4bar) Collet size: 6.35 mm (pre-assembled) DL blow gun Dosing continuously material
DL impact wrench: powder-coated aluminum DL ratchet: powder-coated aluminum DL chisel hammer: powder-coated aluminum DL rod grinder: powder-coated aluminum Accessories: metal with various surface coatings Case: hard polyethylene (HDPE) Dimensions
DL impact wrench: approx. 221 x 194 x 66.5 mm DL ratchet: approx. 285 x 62 x 41 mm DL chisel hammer: approx. 183.5 x 123.5 x 49.5 mm DL rod grinder: approx. 194 x 70 x 42.2 mm Case: approx. 400 x 302 x 110 mm Weight
DL impact wrench: approx. 2040 g DL ratchet: approx. 1226 g DL chisel hammer: approx. 1090 g DL rod grinder: approx. 575 g Accessories: approx. 1566.2 g Case: approx. 1320 g
Manage Consent
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
