PARKSIDE depth gauge / inclinometer, digital
properties
Digital Depth Gauge:
For depth measurement of bores, milled and saw cuts, joints or tire treads
With self-standing frame and magnetic feet
Measuring regulator with locking screw
Adjustable zero point at each measuring depth (reset)
INC or ABS mode selectable
Choice of measured values in mm or inches (inches in decimal or fractional format)
Automatic shutdown after approx. 5 minutes
Digital inclinometer:
Choice of readings in degrees, percent, mm/m or in/ft
Built-in magnet at the base
Automatic switch off after 3 min
With LCD display
Included accessories
Digital depth gauge: attachable hole gauge, storage box, instructions and battery (1 x 3 V / CR2032)
Digital inclinometer: instructions and battery (1 x 1.5 V / AAA)
Technical specifications
Digital Depth Gauge:
Measuring range: about 0~80mm
Hole Depth: Approx. 0~50.8mm (0~2″)
Resolution: about 0.05mm
Accuracy: ±0.1mm (±0.004″)
Repeatability: Approx. ±0.1mm (±0.004″)
Digital inclinometer:
Measuring range: 4 x 90°
Accuracy: ±0.1° (at 0° and 90°) / ±0.2° (other angles)
Resolution: 0.05°
Power supply: 1 x 1.5V AAA battery
material
Aluminum, plastic, nylon and fiberglass
Dimensions
Digital depth gauge: approx. 110 x 144 x 24 mm
Digital inclinometer: approx. 60 x 60 x 28 mm
Weight
Digital Depth Gauge: Approx. 89g
Digital Inclinometer: Approx. 62g