The best source of information about products. It's EverGreen!
PARKSIDE® sandpaper
Characteristics
For sanding walls and floors
With perforation – also suitable for dust extraction devices
Easy to change with Velcro
Suitable for PARKSIDE wall and floor processing system PWBS 180
Also suitable for other common wall and floor processing systems
30 pieces per set
Grit Mixpack: 60 / 80 / 120 / 180 / 240 (6 sheets each)
Dimensions
approx. Ø 180 mm
PARKSIDE angle grinder accessories, Ø 115 mm
Characteristics
For common angle grinders (e.g. from Parkside, Bosch, Black&Decker, Einhell, Makita, Kress, Metabo)
Flap disc set:
For processing steel, stainless steel, cast iron, sheet steel and wood
Grits: K40 (for wood) / K40, K60, K80 (for metal)
Speed: nmax. 13300 rpm / max. 80 m/s
Polishing wheel set:
Made of felt for gentle polishing of metal including stainless steel
Speed: nmax. 9000 rpm / max. 55 m/s
2 pieces
Velcro sanding pad with sandpaper set:
Velcro sanding disc incl. 10-part sandpaper assortment with high removal rate
5 sheets for wood (grit 60•120•180•240•320) / 3 sheets for lacquer (grit 60•120•240) / 2 sheets for stone (grit 400•1200)
Can also be used with standard drills – incl. M14 adapter and instructions
Speed: max. 13300 rpm / max. 80 m/s
Thread: M14
12 pieces
Abrasive fleece set:
For structuring wood, removing rust from metal and sanding paintwork
Set for gentle to strong surface preparation (each 2 x K 100 / 280 / 800)
Also suitable for use with common eccentric sanders (Ø 115 mm) or drills
Including instructions
Working diameter: 115 mm
6 parts
cleaning disc:
Removes rust, paint, scale, oxidation, varnish, spot welds, caulk and other surface contamination
Speed: n 9000 rpm / max. 55 m/s
material
Flap disc set: paper, corundum/aluminium oxide
Buffing wheel set: felt
Velcro sanding disc with sandpaper set: plastic, steel, corundum, paper
Abrasive fleece set: nylon, aluminum oxide
Cleaning Disc: Nylon, Silicon Carbide
Dimensions
Ø 115 mm / Ø bore 22.23 mm
weight
Flap disc set: approx. 280 g
Polishing wheel set: approx. 140 g
Velcro sanding disc with sandpaper set: approx. 180 g
Abrasive fleece set: approx. 95 g
Cleaning disk: approx. 89 g
For processing wood, metal or colored surfaces
Characteristics
Abrasive pad coarse:
For sanding wood and metal
Grit: coarse / medium (240/400)
Sanding pad fine:
For sanding wood and metal
Grit: medium / fine (400/1000)
Aluminum oxide sandpaper:
For sanding wood and metal
Grit: 60
Flint sandpaper:
For sanding wood
Grit: 60
Abrasive sponge coarse:
For sanding wood, metal, paint etc.
2 pieces
Grit: coarse / medium (40/80)
Abrasive sponge fine:
For sanding wood, metal, paint etc.
2 pieces
Grit: medium / fine (80/120)
Abrasive fleece coarse:
For sanding wood and metal
2 pieces
Grit: coarse (240)
Abrasive fleece fine:
For sanding wood and metal
2 pieces
Grit: fine (1000)
steel wool pads:
For cleaning and polishing metal surfaces
4 pieces
Fineness: 0
material
Abrasive pad and abrasive fleece: aluminum oxide and nylon
Abrasive sponge: aluminum oxide and PU sponge
Steel wool pads: steel
Flint Sandpaper: Paper and flint
Aluminum Oxide Sandpaper: Aluminum Oxide
Dimensions
Sanding pad coarse or fine: approx. 13 x 8 cm
Aluminum Oxide Sandpaper: Approx. 115mm x 4m
Flint Sandpaper: Approx. 115mm x 5m
Sanding sponge coarse or fine: approx. 10 x 7 cm
Abrasive fleece coarse or fine: approx. 23 x 15 cm
Steel wool pads: approx. 9 x 3 cm
weight
Coarse sanding pad: approx. 21.5 g
Fine sanding pad: approx. 19 g
Aluminum Oxide Sandpaper: Approx. 255.6 g
Flint Sandpaper: Approx. 250.4 g
Abrasive sponge coarse: approx. 35 g
Fine sanding sponge: approx. 28.7 g
Abrasive fleece coarse: approx. 55.7 g
Abrasive fleece fine: approx. 37.4 g
Steel wool pads: approx. 45 g
Diamond cutter PMZS 50 A1
For fine machining of hard materials such as glass, ceramic or steel
High quality and durable ball, cylinder and cone cutters
Steel # High quality and durable ball, cylinder and cone milling cutter # For common multi-grinders with round shank (suitable for e.g. Parkside, Dremel, Proxxon)
Ø shank: 3.17 mm
Max. Speed: 25000 min-1
20 pieces
Brush and polishing disc set PMZS 50 A1
For cleaning and finishing metal and stone
With steel, brass and plastic brushes as well as felt disks and grinding paste
For common multi-sander with round shank (suitable for e.g. Parkside, Dremel, Proxxon)
Ø shank: 0.11 mm / 3.17 mm
Max. Speed: 15,000 rpm
Rust discoloration or other signs of change can cause premature failure
Protect against deformation, high air humidity, heat, acids, vapors of acids, water and other liquids during storage
16 pieces
Sanding set PMZS 50 A1
For fine machining of metal, wood or plastic
With K 80 flap grinding wheels, K 120 grinding belts and locating pins
For common multi-sander with round shank (suitable for e.g. Parkside, Dremel, Proxxon)
Ø shank: 3.17 mm
Grain size: 80/120
Max. Speed: 30,000 rpm
30 pieces
Grinding pencil set PMZS 50 A1
For fine machining of steel and non-ferrous metals
Durable taper and cylindrical grinding pins including a hand grinding block
For common multi-sander with round shank (suitable for e.g. Parkside, Dremel, Proxxon)
Ø shank: 3.17 mm
Grain sizes: 80/100/120
Max. Speed: 25,000 rpm
11 pieces
Cutting disc set PMZS 50 A1
For fine cutting of soft metals and plastics
In 2 sizes including locating pins
For common multi-sander with round shank (suitable for e.g. Parkside, Dremel, Proxxon)
Ø shank: 3.17 mm
Ø cutting discs: 24 mm / 32 mm
Max. Speed: 30,000 rpm
30 pieces
material
Diamond grinder set 20 pieces: head: (art) diamond coated
Sanding pencils and sanding block set 11 pieces: head: corundum
Wire brushes and polishing set 15 pieces -hard: steel
Wire brushes and polishing set 15 pieces – medium: brass
Wire brushes and polishing set 15 pieces -soft: nylon
Wire brushes and polishing set 15 pieces -Polishing wheel: felt
Sanding set 30 pieces: corundum
Cutting disc set 30 pieces -small: corundum
Cutting disc set 30 pieces – large: silicon carbide
Dimensions
Diamond cutter PMZS 50 A1: approx. L 9.8 x W 5.8 x H 1.6 cm
Brush and polishing disc set PMZS 50 A1
Cup brush: Ø 16 mm
Brush brush: Ø 4 mm
Disc brush: Ø 20 mm
Polishing felt disc: Ø 25 x 6.5 mm
Pick-up pen: L 38 mm
Sanding set PMZS 50 A1
Flap wheel small Ø 15 mm
Large lamellar grinding wheels Ø 30 mm
Locating pin: (head) Ø 6.35 mm
Locating pin: (head) Ø 9.53 mm
Locating pin: (head) Ø 12.7 mm
Sanding belts: Ø 6.35 mm
Sanding belts: Ø 9.53 mm
Sanding belts: Ø 12.7 mm
Grinding pencil set PMZS 50 A1
Cylinder: Ø 10 x 4 mm
Cylinder: Ø 9.5 x 13 mm
Cylinder: Ø 16 x 10 mm
Cylinder: Ø 20 x 4.2 mm
Cone: Ø 10.50 x 19.40 mm
Sanding block: 25 x 9.5 x 9.5 mm
Cutting disc set PMZS 50 A1
Small cutting disc: Ø 24 mm
Large cutting disc: Ø 32 mm
Pick-up pen: L 38 mm
Weight
Diamond cutter PMZS 50 A1: approx. 49 g, 73 g incl. Box
Brush and polishing disc set PMZS 50 A1: approx. 61 g
Sanding set PMZS 50 A1: approx. 45 g
Grinding pencil set PMZS 50 A1: approx. 51 g
Cutting disc set PMZS 50 A1: approx. 31 g
