ULTIMATE SPEED car charger with jump start function »ULG 17 A1« Suitable for: all lead-gel and lead-acid batteries , charging currents: 2 / 6 / 17 A

Go to full screen view: ULTIMATE SPEED® car charger with jump start function »ULG 17 A1« - Image 1
Go to full screen view: ULTIMATE SPEED® car charger with jump start function »ULG 17 A1« - image 5

ULTIMATE SPEED® car charger with jump start function »ULG 17 A1«
properties

Direct engine start when the battery is low without lengthy charging
For car and motorcycle batteries with 12 V or 6 V and 8-250 Ah capacity
Program selection for recharging with optimal adaptation to the battery type
Alternator tester to check the performance
Protected against reverse polarity, short circuit and overload
Intelligent microprocessor control with diagnostic program and controlled loading process
Temperature sensor for adjusting the charging curve at low temperatures
Pulse charge mode to revive dead batteries
Long-term connection for optimal charge retention without sulphate formation
LC display for charging process, voltage value and state of charge
Automatic battery detection with defective battery indication
Lateral charging cable holder for orderly stowage
Suitable for all lead-gel and lead-acid batteries

Technical specifications

Operating voltage: 230 V~ 50 Hz
Charging currents: 2 / 6 / 17 A
Direct start current pulse: approx. 75A / 12V

material

steel, plastic

Dimensions

approx. 32 x 28.5 x 13.5 cm

Weight

approx. 6.5 kg

ULTIMATE SPEED jump leads ALU 16 mm², for petrol engines up to 2,500 cm³ Material: high-quality aluminum core Dimensions: length 2 x 3 m

✓ For petrol engines up to 2,500 cm³
✓ All-round fully insulated terminal clamps
✓ With high-quality, copper-coated aluminum core

Gehe zu Vollbildansicht: ULTIMATE SPEED® Starthilfekabel ALU 16 mm², für Benzinmotoren bis 2.500 cm³ - Bild 1

ULTIMATE SPEED jump leads ALU 16 mm², for petrol engines up to 2,500 cm³
properties

For petrol engines up to 2,500 cm³
All-round fully insulated pole clamps
With high-quality, copper-coated aluminum core
Modern light metal technology according to DIN safety standard 72553-16
Also suitable for vehicles with a start-stop system
Voltage: 12/24V

material

Copper-coated aluminum core

Dimensions

Length: approx. 2 x 3 m

Weight

approx. 1,000 g

ULTIMATE SPEED vehicle charger »ULG 17 A1«, jump start
Direct engine start with a weak battery without lengthy charging.
Suitable for: Batteries with 12 V or 6 V and 8–250 Ah capacity.
Operating voltage: 230 V ~ 50 Hz
Program selection for recharging with optimal adaptation to the battery type
Alternator tester to test performance
Protected against reverse polarity, short circuit and overload

ULTIMATE SPEED vehicle charger with jump start function »ULG 17 A1«
characteristics
Direct engine start with a weak battery without lengthy charging
For car and motorcycle batteries with 12 V or 6 V and 8–250 Ah capacity
Program selection for recharging with optimal adaptation to the battery type
Alternator tester to test performance
Protected against reverse polarity, short circuit and overload
Intelligent microprocessor control with diagnostic program and controlled charging process
Temperature sensor for adapting the charging characteristic at low temperatures
Pulse charging mode to revitalize dead batteries
Long-term connection for optimal charge retention without sulfate formation
LC display for charging process, voltage value and charging status
Automatic battery detection with display when the battery is defective
Lateral charging cable holder for organized storage
Suitable for all lead-gel and lead-acid batteries
Technical specifications
Operating voltage: 230 V ~ 50 Hz
Charging currents: 2/6/17 A.
Direct start current pulse: approx. 75 A / 12 V

Dimensions
approx. W 32 x L 28.5 x D 13.5 cm

Weight
approx. 6.5 kg

Ultimate Speed Jump Leads with LED lights

For petrol engines up to 5,500cc and diesel engines up to 3,000cc
Also suitable for vehicles with start-stop system
Fully insulated clamps with LED lights
Surge protection – absorbs voltage surges and protects the vehicle electronics
Modern light metal technology as per DIN Safety Standard 72553-25
With high-quality copper-coated aluminium core
Cable length: 2 x 3.5m
Includes batteries (LED lights)
Voltage: 12/24V
3-year warranty

For petrol engines up to 5,500cc and diesel engines up to 3,000cc
Also suitable for vehicles with start-stop system
Fully insulated clamps with LED lights
Surge protection – absorbs voltage surges and protects the vehicle electronics
Modern light metal technology as per DIN Safety Standard 72553-25
With high-quality copper-coated aluminium core
Cable length: 2 x 3.5m
Includes batteries (LED lights)
Voltage: 12/24V
3-year warranty

ULTIMATE SPEED jump starter cable, with LED light, surge protection, aluminum core
Cable length: approx. 3.5 m
Voltage: 12/24 V
Fully insulated pole clamps with switchable LED light

ULTIMATE SPEED® jump start cable, with LED light, surge protection, aluminum core 1

ULTIMATE SPEED jump lead »ALU 25 mm²«
properties
For all common vehicles
Fully insulated pole clamps with switchable LED light
Surge protection – absorbs voltage peaks and protects the vehicle electronics
With high-quality and copper-coated aluminum core
Modern light metal technology according to DIN safety standard 72553-25
Curved clamp shape for a good grip and easy clamping
Including batteries (LED light)
For gasoline engines up to 5,500 cm³ and diesel engines up to 3,000 cm³
Also suitable for vehicles with a start-stop system
Corresponds to the conductance of a 25 mm² copper cable
Voltage: 12/24 V.
Dimensions
Cable length: approx. 2 x 3.5 m
Weight
approx. 1.65 kg

UltimateSpeed power bank with compressor UPK 10 B1, for vehicle jump starters, with LED light

ULTIMATE SPEED® Powerbank with compressor »UPK 10 B1«, for vehicle jump starters, with LED light 1

Properties
4-function power bank with powerful Li-ion battery
Including compressor with integrated compressed air hose and digital pressure gauge
Vehicle jump starter with immediate start due to high current impulse up to 200 A for a short time
Suitable for petrol engines with a maximum displacement of 3.5 liters and diesel engines with a maximum displacement of 2.2 liters
2 USB charging outputs for smartphones, tablets or Mp3 players
LED light
Presettable compressor air pressure between 0.3 to 3.5 bar with automatic shutdown when the pressure is reached
Including mains charger, car jump lead and 3 compressed air attachments (nozzle, ball needle, air mattress adapter)
Protected against reverse polarity, short circuit, overcharge and overheating
Protection circuit for the detection of defective or deeply discharged vehicle batteries for maximum protection of the electronics and the user
Charge status display via 4 LEDs
Technical details
Self-starting aid with 14,000 mAh power bank and compressor
Jump start current: maximum 200 A (12 volts)
2 x USB output, total output current 3 A
Input voltage charger: approx. 230 volts / 50 Hz
Maximum battery charging time: 8 hours
Input current: 0.4 A at 15 volts
Peak current: approx. 400 A (3S)
material
Main unit made of plastic (housing mainly made of acrylonitrile / butadiene / styrene (ABS))
Dimensions
Power bank with compressor without cable: approx. W 19.2 x H 14.5 x D 5.4 cm
Jumper cables: red cable: approx.17.8 cm / black cable: approx.8.3 cm
Charging cable length: approx. 116.0 cm
Hose including connections Length: approx.35.2 cm
Weight
Power bank with compressor without cable with 3 adapters: approx.1.095 kg
Jump start cable: approx. 136 g
Hose including connections: approx. 47 g
Charger: approx. 77 g

UltimateSpeed Power Bank With Compressor UPK 10 B1

POWERBANK MIT KOMPRESSOR UPK 10 B1 POWER BANK WITH COMPRESSOR UPK 10 B1 BATTERIE DE SECOURS EXTERNE AVEC COMPRESSEUR UPK 10 B1

IAN: 311612

Features
Power Bank With Compressor UPK 10 B1
4-in-1 power bank with powerful Li-Ion battery (14Ah)
Air pressure values from 0.3 to 3.5 bar can be selected – device will automatic shut off whenpressure is reached.
Includes mains charger, vehicle jump starter cables and 3 compressed air attachments (nozzle, ball needle, air bed adaptor).
Protected against reverse polarity, short circuit, overcharging and overheating
Protection circuit for detecting defective or deeply discharged vehicle batteries for maximum protection of the electronics and the user
Charge indicator via 4 LEDs
Vehicle jump starter suitable for petrol engines up to max. 3500cc and diesel engines up to max. 2200cc
Pressure selection between 0.3 and 3.5 bar
Pressure gauge not calibrated

Car Battery Charger with Jump START Function ULG 12 A2

IAN: 277071

Features
CAR BATTERY CHARGER WITH JUMP START FUNCTION ULG 12 A2
Can start engine with low battery
For car and motorcycle batteries with 12V or 6V and 8-180Ah capacity
Program selection for recharging with optimal adaptation to battery type
Direct start without lengthy recharging with high current pulse (approx. 75A / 12V)
Intelligent microprocessor control with diagnostics programme and controlled charging process
Recharges drained batteries
Long-term connection for optimal charge retention without sulphate formation
LCD display for charging process, voltage value and charge status
Protected against reverse polarity, short circuit and overload
Suitable for all lead-gel and lead-acid batteries
Operating voltage: 230V~50Hz
Charging currents: 2 / 6 / 12A (±10%)

UltimateSpeed Battery Charger with Jump Start Function ULG 12 B3

IAN: 290923

Features
Battery Charger with Jump Start Function ULG 12 B3
Can start engine with low battery without lengthy charging
For car and motorcycle batteries with 12V or 6V and 8-180Ah capacity
Program selection for recharging with optimal adaptation to battery type
Alternator tester for performance testing
Protected against reverse polarity, short circuit and overload
Intelligent microprocessor control with diagnostics programme and controlled charging process
Recharges drained batteries
Long-term connection for optimal charge retention without sulphate formation
LCD display for charging process, voltage value and charge status
Lateral charging cable holder for neat storage
Suitable for all lead-gel and lead-acid batteries