Features Li-Ion Cordless Screwdriver PAS 4 C4 Versatile – comes with 4 different attachments
Notes on trademarks
USB® is a registered trademark of USB Implementers
Forum, Inc.
All other names and products may be trademarks
or registered trademarks of their respective owner.
Features
Rotation direction switch/safety lock-out
Motor direction indicator for clockwise rotation
Battery charge level indicator
Motor direction indicator for anticlockwise
rotation
Charging socket (appliance)
ON/OFF switch
LED lamps
Tool holder
Charger
9a USB plug of the charging cable
9b USB-C plug on charging cable
Torque attachment
Lock button
Eccentric attachment
Angle attachment
Cutting attachment
Bits and bit extension
Package contents
1 Li-Ion Cordless Screwdriver
1 charger
1 carrying tool bag
1 charging cable
26 bits x 25 mm
2 bits x 50 mm
1 bit extension
1 torque attachment
1 eccentric attachment
1 angle attachment
1 cutting attachment
1 set of operating instructions
Technical data
Li-Ion Cordless Screwdriver: PAS 4 C4
Nominal voltage: 4 V (DC)
Battery (integrated): (1 cell)
Battery capacity: 1500 mAh
Rated idle speed: n0
200 rpm
Torque: max. 5.0 Nm
Tool holder: 6.35 mm (¼”)
Use only the following charger to charge the
cordless tool:
PAS 4 C4-1:
INPUT:
Rated voltage: 100–240 V ∼ 50-60 Hz
(AC)
Rated current: 16 W
Features Cordless Circular Saw 20V PHKSAP 20-Li A1 Brushless motor – particularly long lifespan due to low wear and tear On/off switch with quick stop Adjustable cutting depth and cutting angle With LED work light Pendulum blade guard with pull-back lever 90 minute fast charger with automatic switch-off Connection to external dust extractor – includes adaptor Easy saw blade exchange with spindle restraint SPINDLE LOCK Ergonomic soft grip with safety switch operable on both sides 3-stage battery status indicator For standard saw blades size: Ø 190mm (e.g. from Parkside)
Features Cordless Angle Grinder 20V PWSAP 20-Li B2 Brushless motor – especially durable, powerful with less wear & tear Robust die-cast aluminium gear housing with 3-position front handle Powerful Li-Ion battery with charge level indicator Electronically controlled Soft-Start and Quick-Stop Quick tool-free adjustment of the safety guard With spindle lock for changing disc easily Suitable for all standard discs up to Ø 125mm (e.g. from Parkside) Can also be used with wire cup or knotted bevel brushes Fast charger with automatic charging switch-off Non-slip handles Includes quick-release nut for tool-free disc exchange
Features
Power Bank With Compressor UPK 10 A1
4-in-1 power bank with powerful Li-Ion battery (14Ah)
Protected against reverse polarity, short circuit, overload and overheating
Recognises defective or deeply discharged car batteries
Charge indicator via 4 LEDs
Includes mains charger, car jump leads, USB cable and 3 compressed air attachments (nozzle, ball needle, air bed adaptor)
Car jump starter suitable for petrol engines up to max. 2000cc and diesel engines up to max. 1600cc
Maximum compressor operating pressure: 10 bar
Characteristics:
4-function powerbank with powerful Li-ion battery:
10 bar compressor with integrated compressed air hose and pressure gauge
Car Jump Starter with instant start by high current pulse
USB charging port for smartphones, tablets or Mp3 players
LED light
Protected against reverse polarity, short circuit, overload and overheating 4 in 1
Detection of defective or deeply discharged car batteries
Charge level indicator via 4 LEDs
Car starting aid suitable for gasoline engines and diesel engines
Technical details:
Li-ion battery: approx. 14000 mAh
Voltage: approx. 230 Volt, 50 Hz
Maximum charging time Battery: 8 hours
Input current: 1A at 12 volts
Output current: approx. 12 volts, 2 A
Peak current: approx. 400 A (3S)
Maximum compressor operating pressure: 10 bar
Maximum air capacity: 20 liters / minute
Jump start: approx. 200 A (12 Volt)
Jump starter suitable for:
Petrol engines up to a maximum of 2.0 liters
Diesel engines with a maximum displacement of 1.6 liters
Dimensions:
Main unit: approx. W 18 x H 6,1 x D 18,4 cm
Jumper cable: approx. L 29.5 cm
Charging cable: approx. L 30.5 cm
Mass: Main unit: approx. 1.15 kg Jumper cable: approx. 149 g Charging cable: approx. 47 g
Features:
60-minute fast charger with automatic charge switch-off
Single-sleeve quick-release drill chuck
On / off switch with stepless speed control and quick stop
Integrated LED work light
Powerful PARKSIDE SPEEDMASTER engine with 2-speed gearbox
3-stage battery status display
Both sides with magnetic bit holder
Practical belt clip
Ergonomic softgrip
Automatic charge shutdown
Battery compatible with all devices of the series PARKSIDE X 20 V Team
Technical performance data: Battery: Lithium-ion maximum 20 volts (2.0 Ah) Rated load speed: 1st gear: about n0 0-400 min-1 2nd gear: approx. N0 0-1400 min-1 Preselection: 25 torque steps + drilling step Max. Torque: 35 Nm Chuck capacity: maximum Ø 13 mm Included accessories: 1 bit Max. Drilling diameter: Wood: 30 mm / Steel: 13 mm Lock: Automatic – SPINDLE-LOCK
Manage Consent
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.