MIOMARE® shower rail set wellness with 5 functions properties Stainless steel shower rail with soap holder, shower head and shower hose 5 spray modes: Rain jet – powerful shower jet, ideal for rinsing out shampoo Rain + massage mixed jet – strong combination jet Massage jet – concentrated jet for massaging tension at points Foam jet – gently foaming jet to relax Foam + mixed rain jet – for full showering pleasure Easy installation thanks to the 21 mm standard connection (G 1/2 “) Flexible, easy-to-clean anti-limescale soft nozzles Less water consumption thanks to the water-saving seal With rotating cone: practical protection against twisting of the hose Chemically and microbiologically tested – tested according to KTW and W 270 Suitable for all pressure-resistant water systems such as central heating, instantaneous water heaters, pressure boilers, etc. material Shower head body, soap dish: plastic, chrome-plated Shower hose jacket, shower rail: stainless steel Inner hose, connection sleeves, shower plate, anti-limescale knobs: plastic Seal: silicone Dimensions Shower head: approx. 28.5 x Ø 15 cm Shower rail: approx. Ø 2.5 x L 70 cm Shower hose: approx. L 150 cm weight approx. 950 g
MIOMARE® shower rail set wellness with 5 functions properties Stainless steel shower rail with soap holder, shower head and shower hose 5 spray modes: Rain jet – powerful shower jet, ideal for rinsing out shampoo Rain + massage mixed jet – strong combination jet Massage jet – concentrated jet for massaging tensions at specific points Foam jet – gently foaming jet to relax Foam + mixed rain jet – for full showering pleasure Easy assembly with 21 mm standard connection (G 1/2 “) Flexible, easy-to-clean anti-limescale soft nozzles Less water consumption thanks to the water-saving seal With rotating cone: practical protection against twisting of the hose Chemically and microbiologically tested – tested according to KTW and W 270 Suitable for all pressure-resistant water systems such as central heating, instantaneous water heaters, pressure boilers, etc. material Shower head body, soap dish: plastic, chrome-plated Shower hose jacket, shower rail: stainless steel Inner hose, connection sleeves, shower plate, anti-limescale knobs: plastic Seal: silicone Dimensions Shower head: approx. 28.5 x Ø 15 cm Shower rail: approx. Ø 2.5 x L 70 cm Shower hose: approx. L 150 cm weight approx. 950 g
PLAYTIVE expansion set characteristics Promotes creativity, imagination and fine motor skills Can be combined with other Playtive train and vehicle sets Compatible with standard wooden rail and wooden road sets Item contains wooden and plastic parts Loading crane: The magnetic load can be loaded onto the trailer by cranking the sliding crane cabin Loading crane with railroad, trailer, container and figure 5 parts Flex tunnel: Freely combinable tunnel elements with numerous play options, can be set up as straight lines or curves Tunnel including 4 wooden rails Rails made from European beech wood 7 pieces Long bridge: Freely combinable bridge elements with driveways Arch bridge including 6 wooden rails Rails made from European beech wood 8 pieces Switch house: Point adjustment with interactive signal display and mechanical bell tower Switch house with wooden roof 2 parts Age recommendation: from 3 years material Loading crane: pine, ABS, magnet, Schima, polypropylene (PP) Flex tunnel, 7 parts: beech, ABS Long bridge: beech, ABS Switch house: beech, ABS Dimensions Loading crane: L 20.1 x W 9.8 x H 21.1 cm Figure H: 4.5 cm Container: 4 x 2 x 2.6 cm Locomotive: 8.1 x 3.2 x 4.8 cm Pendant: 9.5 x 3.3 x 3.8 cm Flex tunnel: L 33 x W 14.3 x H 9.5 cm Straight 150s: 150 x 40 x 12 mm Curve 160: 160 x 40 x 12 mm Long bridge: L 109 x W 6 x H 17.5 cm S-ramp: 227 x 40 x 12 mm Straight 150s: 150 x 40 x 12 mm Switch house: L 16.3 x W 16.7 x H 15.3 cm Height of the base plate: 12 mm Weight Loading crane: total weight: 310 g Flex tunnel: total weight: 350 g Long bridge: total weight: 450 g Switch house: total weight: 260 g scope of delivery Loading crane: 1x crane 1x figure 1x container 1x locomotive 1x trailer Flex tunnel: 3x tunnel elements 4x wooden rails Long bridge: 2x bridge elements 6x wooden rails Switch house: 1x switch house 1x bell tower
Mobile, with 4 wheels – 2 with brakes Height adjustable from 99 to 167cm Folds to save space, with quick-release fasteners Sturdy metal construction Quick and easy assembly – includes fixings Size: W88.5 x H99–167 x D48cm
PLAYTIVE expansion set characteristics Promotes creativity, imagination and fine motor skills Can be combined with other Playtive train and vehicle sets Compatible with standard wooden rail and wooden road sets Item contains wooden and plastic parts Loading crane: The magnetic load can be loaded onto the trailer by cranking the sliding crane cabin Loading crane with railroad, trailer, container and figure 5 parts Flex tunnel: Freely combinable tunnel elements with numerous play options, can be set up as straight lines or curves Tunnel including 4 wooden rails Rails made from European beech wood 7 pieces Long bridge: Freely combinable bridge elements with driveways Arch bridge including 6 wooden rails Rails made from European beech wood 8 pieces Switch house: Point adjustment with interactive signal display and mechanical bell tower Switch house with wooden roof 2 parts Age recommendation: from 3 years material Loading crane: pine, ABS, magnet, Schima, polypropylene (PP) Flex tunnel, 7 parts: beech, ABS Long bridge: beech, ABS Switch house: beech, ABS Dimensions Loading crane: L 20.1 x W 9.8 x H 21.1 cm Figure H: 4.5 cm Container: 4 x 2 x 2.6 cm Locomotive: 8.1 x 3.2 x 4.8 cm Pendant: 9.5 x 3.3 x 3.8 cm Flex tunnel: L 33 x W 14.3 x H 9.5 cm Straight 150s: 150 x 40 x 12 mm Curve 160: 160 x 40 x 12 mm Long bridge: L 109 x W 6 x H 17.5 cm S-ramp: 227 x 40 x 12 mm Straight 150s: 150 x 40 x 12 mm Switch house: L 16.3 x W 16.7 x H 15.3 cm Height of the base plate: 12 mm Weight Loading crane: total weight: 310 g Flex tunnel: total weight: 350 g Long bridge: total weight: 450 g Switch house: total weight: 260 g scope of delivery Loading crane: 1x crane 1x figure 1x container 1x locomotive 1x trailer Flex tunnel: 3x tunnel elements 4x wooden rails Long bridge: 2x bridge elements 6x wooden rails Switch house: 1x switch house 1x bell tower
SILVERCREST heated wall / standing towel rail »SHH 150 A1« characteristics Can be used as a wall or standing device For quick warming and drying of towels Incl. Fixing material for wall mounting Can also be used free-standing as a towel warmer and clothes rack 8 heating elements Temperature of the heating elements: approx. 50 ° C *** With on / off switch for convenient operation Timer function with automatic switch-off (2 hours and 4 hours) IP22 – protected against dripping water Cable length: 1.5 m Power consumption: 150 W *** Depending on the ambient temperature, room size and use material aluminum Dimensions As a wall towel holder: 530 x 100 x 860 mm As a towel holder: 530 x 355 x 900 mm Weight approx. 2200 g
LIVARNO LUX spot rail, 4-flame, swiveling spots with glass shades, metal body Pleasant, glare-free lighting Suitable for ceiling mounting indoors Rotatable and swiveling spots with matt white glass shades Stable metal body in matt nickel look 4 energy-saving LED lamps with warm white light Incl. Instructions and assembly material Parkside cordless impact wrench Technical details
Color temperature: approx. 3,000 Kelvin Color rendering: approx. Ra 80 Lifespan: approx. 25,000 hours Switching cycles: approx. 100,000x on / off Luminous flux: approx. 500 lumens, 5 watts Dimensions
Collapsible to save space thanks to practical quick-release fasteners properties Mobile use thanks to 4 wheels 2 of them with locking function Infinitely height adjustable from approx. 99 to 167 cm Sturdy metal construction Set up quickly and easily Collapsible to save space Including assembly material and assembly instructions Maximum load: 15 kg material metal Dimensions W 88.5 x H 99 – 167 x D 48 cm Weight approx. 3 kg
Manage Consent
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.