PARKSIDE pneumatic die grinder set »PDSS 16 A1« / cutoff grinder »PDTS 6.3 B3«
properties
Cut-off machine:
For cutting thin sheet metal up to a thickness of 3 mm
Ideal for working on bodywork, metal cladding or profiles
On / off switch with switch-on lock
Suitable for all commercially available cutting discs up to Ø 75 mm
Included accessories: 1 metal cutting disc Ø 75 mm (pre-assembled), 1 Allen key and 1 assembly key to change the disc, 1 plug nipple ¼ “with sealing ring (pre-assembled)
Die grinder:
For sanding straight and curved surfaces
With 10-piece grinding bit set in various shapes
Release lever with fuse
Suitable for all commercially available attachments with a 3 mm shaft or 6 mm shaft
Included accessories: 5 grinding bits (6 mm), 5 grinding bits (3 mm), 1 collet (¼ “/ pre-assembled), 1 collet (¹⁄₈”), 2 open-ended spanners, 1 plug nipple (¼ “) including sealing ring (pre-assembled)
Technical specifications
Max. Working pressure: 6.3 bar
Compressed air connection: ¼ “(6.35 mm)
Cut-off machine:
Cutting disc diameter: up to 75 mm
Speed: max. 20300 min-¹
Die grinder:
Rated speed: 22500 min-¹
Attachment shaft sizes: 3 mm / 6 mm
material
Cut-off machine: aluminum
Die grinder:
Housing: aluminum, sheet metal
Allen screw, disc holder: steel
Allen key, counter key: metal
Dimensions
Cut-off machine:
Cut-off machine: approx. 210 x 96 x 80 mm
Cutting disc: approx. Ø 75 mm
Die grinder:
Die grinder: approx. 195 x 80 x 43 mm
Case: approx. 230 x 180 x 80 mm
Weight
Cut-off machine:
Cut-off machine: approx. 722 g
Allen key: approx. 13.4 g
1/4 “nipple including seal: approx. 16.3 g
Cutting disc: approx. 11.2 g
Two-hole key: approx. 18.4 g
Die grinder:
Die grinder: approx. 555 g
Open-end wrenches (2 pieces): approx. 39 g
Collet: approx. 11.5 g
Case: approx. 420 g
Sanding bits (10 pieces): approx. 115 g