The best source of information about products. It's EverGreen!
ULTIMATE SPEED® floor mat set, 4 pieces
properties
2x front floor mats
2x rear floor mats
Anti-slip knobs on the back
easy to clean
cannot be cut to size
material
Aluminum, polyvinyl chloride (PVC)
Dimensions
left front floor mats: approx. 65 x 46 cm right front floor mats: approx. 67 x 48 cm rear floor mats: approx. 33 x 45 cm
weight
approx. 3000 g (set)
ULTIMATE SPEED® car cleaning brushes, suitable for standard hose couplings
properties
Suitable for standard hose couplings
Infinitely adjustable water flow
Also suitable for cleaning bicycles or motorcycles
Ergonomic, non-slip handle
Rotating cleaning brush:
Ideal for thorough cleaning of rims, hubcaps and hard-to-reach areas
Rotating round brush with turbine housing
With 2 interchangeable brush heads (soft / hard)
Cleaning brush:
Ideal for thorough cleaning of large areas
Strong bristles remove even stubborn dirt
ULTIMATE SPEED® car cleaning brushes
Technical specifications
Maximum operating pressure: 4 bar
material
plastic
Dimensions
Rotating cleaning brush: approx. L 16.6 x W 3.6 x H 4.2 cm
Cleaning brush: approx. L 31 x W 8 x H 10 cm
properties
For effortless transport and space-saving storage
For 4 complete car wheels up to approx. 46 cm (18 inches) and 255 mm tire width (255/55 R18)
Mobile thanks to 3 castors – with a parking brake
Anti-slip, ergonomically shaped handle
Free space prevents the formation of damaged condensation on tires and rims
Rim-friendly pads
Deformation-free storage even if there is a loss of pressure
Including extensive accessories and instructions
Tire protection cover with practical Velcro fastener
4 colored chips for tire identification
Bag for storing the wheel nuts
Compressed air tester, measuring range 0.7–3.5 bar (10–50 PSI)
Profile depth tester, measuring range 0–20 mm
2 assembly keys
Maximum load: 100 kg
material
Pipes: Q 195 steel
Handle: Thermoplastic Rubber (TPR)
Wheels: polypropylene (PP)
Screws + retaining pins: steel A3
Support plate: plastic polypropylene (PP)
Dimensions
approx. W 124 x H 95.5 x D 121 cm
Tire protection cover: approx. Ø 70 x L 110 cm
weight
Without accessories: approx. 6.9 kg
Including accessories: approx. 7.2 kg
ULTIMATE SPEED® polishing machine »UPM 120 B3«
properties
Powerful and powerful orbital oscillator
For comfortable polishing and sealing of lacquered surfaces
Ergonomic two-hand guide
Low noise development
Connected load: 120 W
Idle speed: 3,700 rpm
Power cord length: 5 m
Included accessories: 4 washable polishing hoods (2 x terry towels, 2 x synthetic fur)
material
SECTION
Dimensions
Polishing plate: approx. Ø 25 cm
weight
approx. 2.3 kg
ULTIMATE SPEED® hubcap set of 4
properties
4 pieces per set
Corrosion Resistant
Spring steel ring 3-way adjustable with special valve recess
Suitable for all common cars with steel rims
Impact-resistant and break-proof
material
Polypropylene
Dimensions
silver, glossy black: 14 inches
silver, silver-black-matt: 15 inches
silver: 16 in
ULTIMATE SPEED® semi-garage, weather and temperature resistant
properties
Protects your car from snow and ice as well as dirt, flowers and resin
Made of durable, waterproof and UV-resistant film
Weather and temperature resistant from -40 to +70 ° C
Reinforced eyelets for secure attachment – including 6 elastic straps
Available in other sizes
Dimensions
S / M: approx. W 170 x H 80 x L 265 cm
L / XL: approx. W 180 x H 80 x L 275 cm
Combi: approx. W 180 x H 80 x L 310 cm
Warning notices
CAUTION! Not suitable for long-term coverage. Remove the semi-garage every 3-4 days to check for condensation. Only place on a dry and dust-free trolley. Do not use the protective cover when it is wet or when the vehicle is wet.
ULTIMATE SPEED® wheel nut wrench
properties
For a simple tire change
Increased leverage thanks to the adjustable handle bar – also loosens stuck screws
Rotatable handle for effortless unscrewing without changing your grip
With mounting lever – for quick removal of hubcaps
Can be dismantled to save space
Including 2 socket wrenches (17/19 and 21/23 mm) and storage bag
ULTIMATE SPEED® car mobile phone holder, with suction cup
properties
Adjustable holder – suitable for all common smartphones
For smartphones with a width of approx. 58-84 mm
Secure hold thanks to a strong suction cup vacuum system
Can be rotated 360 ° – ideal e.g. B. for navigation functions in landscape format
3-point mounting for high stability against vibrations
Convenient one-hand operation
Including instructions
material
Acrylonitrile-butadiene-styrene copolymer (ABS)
Dimensions
approx L 17 cm
weight
approx. 115 g
ULTIMATE SPEED® replacement vehicle lamps and fuses, 11 pieces
properties
Main headlight lamps with up to 50% more light compared to the legal minimum requirement
According to the ECE R37 standard
UV-free light – also suitable for plastic lenses
Selectable as H4 or H7
Headlight bulbs Made in Germany
Dimensions
Box: approx. 140 x 94 x 56 cm
weight
Box: approx. 180 g
ULTIMATE SPEED® car cup holder
properties
Back seat organizer
With two compartments for storing pens, smartphones, sunglasses and much more
Simple, height-adjustable attachment to the headrest
Car seat cup holder
Simple attachment between the front seats
With 2 holders for drinks and 1 universal compartment for smartphone, sunglasses or parking card
Double cup holder
Comfortable, practical organizer
Suitable for beverage cans, bottles or coffee mugs
Simple attachment in the existing cup holder – for two drinks at the same time
Including instructions
material
polyester
Dimensions
Rear seat organizer: approx. L 20 x W 9 x H 8.5 cm
Car seat cup holder: approx. L 27.6 x W 10 x H 20.7 cm
Double cup holder: approx. L 16.5 x W 8 x H 10 cm