The best source of information about products. It's EverGreen!
IAN: 279058
Features
Electric All-Purpose Sharpener
For knives, scissors and screwdrivers
3 sharpening functions
Smooth, serrated and scissor sharpening
Select sharpening using the rotatable function-/protective cap
Non-slip feet for stability
Removable dust catcher
Power consumption: 20W
Not suitable for ceramic knives.
IAN: 73380
Features
Comprehensive equipment for DIY enthusiasts
Set contains:
6 open-end spanners: 6×7 – 8×9 – 10×11 – 12×13 – 14×15 – 16x17mm, CrV, DIN 3110, VPA/GS
8 pin spanners, hex socket, with plastic holder: 1.5 – 2 – 2.5 – 3 – 4 – 5 – 5.5 – 6mm, CrV, DIN ISO 2936, VPA/GS
1 water pump pliers 240mm, dual-component handle, carbon steel, DIN ISO 8976, VPA/GS
1 side cutters 160mm, dual-component handle, carbon steel, DIN ISO 5749, VPA/GS
1 crosshead screwdriver, PH 2×125, dual-component handle, DIN ISO 8764, VPA/GS
1 slotted screwdriver, SL 4×100, dual-component handle, DIN ISO 2380, VPA/GS
1 voltage tester 120 – 250V, Made in Germany, DIN 57680-6, VDE/GS
1 magnetic driver for bits, D 6.3mm, CrV, DIN 7431, VPA/GS
1 adaptor for sockets, 6.3xE 6.3mm (1/4″), CrV, DIN 7428, VPA/GS
16 bits: PH 1-2; SL 4-5.5-6.5; PZ 1-2; TX 10-15-20-25-30; HEX 3-4-5-6, S2 steel, DIN 2351-1; DIN 2351-2; DIN 2351-3, VPA/GS
1 hammer, 200g, DIN 1041, TÜV/GS
1 utility knife with belt cutter, VPA/GS
1 set replacement utility blades (5 pieces), VPA/GS
1 precision slotted screwdriver, SL1.5×50, dual-component handle, VPA/GS
1 precision crosshead screwdriver, PH 0x50, dual-component handle, VPA/GS
1 handsaw 150mm
1 set replacement blades for handsaw
1 measuring tape, 3m, CE
45 piece set
IAN: 104470
Features
ALL-PURPOSE TOOL CASE
Set contains:
6 open-end spanners: 6×7 – 8×9 – 10×11 – 12×13 – 14×15 – 16x17mm, CrV, DIN 3110, VPA/GS
8 pin spanners, hex socket, with plastic holder: 1.5 – 2 – 2.5 – 3 – 4 – 5 – 5.5 – 6mm, CrV, DIN ISO 2936, VPA/GS
1 pair of water pump pliers 240mm, dual-component handle, carbon steel, DIN ISO 8976, VPA/GS
1 pair of combination pliers 160mm, dual-component handle, carbon steel, DIN ISO 5746, VPA/GS
1 crosshead screwdriver, PH 2×125, dual-component handle, DIN ISO 8764, VPA/GS
1 slotted screwdriver, SL 4×100, dual-component handle, DIN ISO 2380, VPA/GS
1 voltage tester 120 – 250V, Made in Germany, DIN 57680-6, VDE/GS
1 magnetic driver for bits, D 6.3mm, CrV, DIN 7431, VPA/GS
1 adaptor for sockets, 6.3xE 6.3mm (1/4′), CrV, DIN 7428, VPA/GS
16 bits: PH 1-2/ SL 4-5.5-6.5/ PZ 1-2/ T 10-15-20-25-30/ HEX 3-4-5-6, S2 steel, DIN 2351-1/ DIN 2351-2/ DIN 2351-3, VPA/GS
1 hammer, 200g, DIN 1041, TÜV Rheinland/GS
1 snap-off knife, VPA/GS
5 replacement snap-off blades, VPA/GS
1 precision slotted screwdriver, SL1.5×50, dual-component handle, VPA/GS
1 precision crosshead screwdriver, PH 0x50, dual-component handle, VPA/GS
1 handsaw 150mm
1 set replacement blades for handsaw
1 measuring tape 3m, CE
45 piece set
IAN: 92517
Features
CAR BATTERY CHARGER ULGD 3.8 A1
Intelligent microprocessor control with diagnostics programme and controlled charging process
For all 6V or 12V car and motorcycle batteries with 1.2-120Ah capacity
Protected against reverse polarity, short circuit and overload
Pulse charge to recharge flat batteries*
Long-term connection for optimal charge retention without sulphate formation
4 programmes for optimal adaptation to the battery type
LCD display for charging programmes, voltage value and charge status
LEDs for polarity error warning and stand-by mode
IAN: 52183
Features
Suitable for all Ni-MH and Ni-Cd rechargeable batteries
Charges up to 8 batteries simultaneously
Intelligent charging monitors each individual slot
With discharge function for consistently high battery performance
Tests capacity and diagnoses inserted batteries with coloured LED indicators
Shutdown after 17 hours and Delta-U voltage monitoring (automatically switches to trickle charging)
Suitable for worldwide use with 100-240V input voltage
Overcharge and reverse polarity protection
Fully automatic rechargeable battery recognition
Charging programme: Refresh, charging and trickle charging
Batteries not included
Rechargeable battery type (Ni-MH/Ni-Cd)
Micro (AAA)
Mignon (AA)
Baby (C)
Mono (D)
9V block
Capacity (mAh): 150-1000 / 600-2500 / 1000-5000 / 1000-9000 / 100-200
Charging time (h): approx. 0.7-4.7 / 1.2-5 / 1.4-7 / 1.4-12.6 / 2-4
Charging current (mA): 300 / 700 / 1000 / 1000 / 70
Product downloads