Tag: Charger

Posted on

SilverCrest Wireless Qi Charger SQWC A2

KABELLOSES QI-LADEGERÄT/ WIRELESS QI CHARGER/ CHARGEUR SANS FIL QI SQWC A2

Manual

IAN: 322212

Features
Wireless Qi Charger
Simply place your smartphone on the charger and it charges by induction
Non-slip rubber coating on the top and bottom
For all Qi-enabled mobile devices, e.g.: iPhone X, iPhone XR, iPhone 8 / 8 Plus, Samsung Galaxy S8 / S8 Plus, S7 / S7 Edge, Note 8 and other Qi-supported smartphones
LED indicator light
Textile cover prevents scratches
Stylish, compact design
Includes a flat 1.5m cable with USB-A connector
Also charges through thin phone cases

Posted on

Tronic Quick-Charge Battery Charger TLG 1750 B3

Manual

IAN: 71662

Features
For use with rechargeable Ni-MH and Ni-Cd batteries (AA/AAA)
USB port for all current USB devices (500mA charging current)
Simultaneously charges up to 4 batteries – individual slots monitored by micro-controller, 4 LED indicate operating status
Rechargeable battery defect detection, reverse voltage protection and safety timer
Delta-U voltage monitoring with auto-stop function and temperature monitor
Charging time: approx. 1-3 hours
Mains adaptor for global use (100-240V ~ 50/60Hz) – with extra adaptor cable for 12V cigarette lighter
Storage pouch included
Manual switch between Ni-MH and Ni-Cd
Maximum charging currents:
Ni-MH: Mignon (AA): 1750 mA, Micro (AAA): 750 mA
Ni-Cd: Mignon (AA): 700 mA, Micro (AAA): 300 mA
For adaptor only
4 LED (red/green) charging slot status indicator
Charging programmes:
Battery defective
Batteries charging
Charge complete

Posted on

SilverCrest USB Charger

Manual

IAN: 56971

Features
Battery charger/power supply via 12 or 24V cigarette lighter
Compact charger for devices chargeable via USB
For example iPod, iPhone, MP3 player, etc.
Ideal for on the road – no need for separate chargers
Rated input voltage: 12/24V
Output voltage: 5V; up to 1.2A; short-circuit protective circuit
Dimensions: approx. 43 x 31mm
Please note the requirements specified by the device manufacturer
Battery charger/power supply via power socket
Compact charger for devices chargeable via USB
For example iPod, iPhone, MP3 player, etc.
Rated input voltage: 100-240V
Output voltage: 5V; up to 0.7A; short-circuit protective circuit
Dimensions: approx. 56 x 36 x 20mm (W x H x D)
Please note the requirements specified by the device manufacturer
iPod and iPhone are trademarks of Apple Inc. – registered in the USA and other countries

Posted on

Tronic Fast Battery Charger With USB Port TLG 1000 C5

IAN: 321421

Manual

Features
Fast Battery Charger With USB Port
Minus Delta U shut-off makes it impossible to overcharge batteries (AA/AAA/C/D)
Charges up to 8 rechargeable batteries at a time*
For use with Ni-MH and Ni-Cd rechargeable batteries
LCD display indicates charging status
Charging slots with LED status indicator, show the charging mode
USB port (1000mA) for charging devices such as mobile phones** etc.
Intelligent charging with individual slot monitor and discharge function for consistent battery performance
Automatic shut-off after 17 hours
Suitable for worldwide use with 100-240V input voltage
Reverse voltage protection and automatic battery recognition
Charging modes: refresh function, pre-charge, charge and trickle charge

Posted on

UltimateSpeed Car Battery Charger ULG 3.8 A1

IAN: 74798

Manual

Features
Electronically controlled, fully automatic charging with LED indicator
For all 6V or 12V car and motorcycle batteries with 1.2-120Ah capacity
Protected against reverse polarity, short circuit and overload
Pulse charging to revitalise drained batteries
Long-term connection for optimal charge retention without sulphate formation
4 modes for optimal adaptation to the type of battery
Max. charging rate: 3.8A
Operating voltage: 220-240V ~ 50/60Hz

Posted on

UltimateSpeed Car Battery Charger ULGD 3.8 A1

IAN: 92517

Manual

Features
CAR BATTERY CHARGER ULGD 3.8 A1
Intelligent microprocessor control with diagnostics programme and controlled charging process
For all 6V or 12V car and motorcycle batteries with 1.2-120Ah capacity
Protected against reverse polarity, short circuit and overload
Pulse charge to recharge flat batteries*
Long-term connection for optimal charge retention without sulphate formation
4 programmes for optimal adaptation to the battery type
LCD display for charging programmes, voltage value and charge status
LEDs for polarity error warning and stand-by mode

Posted on

Car Battery Charger with Jump START Function ULG 12 A2

IAN: 277071

Manual

Features
CAR BATTERY CHARGER WITH JUMP START FUNCTION ULG 12 A2
Can start engine with low battery
For car and motorcycle batteries with 12V or 6V and 8-180Ah capacity
Program selection for recharging with optimal adaptation to battery type
Direct start without lengthy recharging with high current pulse (approx. 75A / 12V)
Intelligent microprocessor control with diagnostics programme and controlled charging process
Recharges drained batteries
Long-term connection for optimal charge retention without sulphate formation
LCD display for charging process, voltage value and charge status
Protected against reverse polarity, short circuit and overload
Suitable for all lead-gel and lead-acid batteries
Operating voltage: 230V~50Hz
Charging currents: 2 / 6 / 12A (±10%)

Posted on

Tronic All-Purpose Battery Charger TLG 1000 A1

IAN: 52183

Manual

Features
Suitable for all Ni-MH and Ni-Cd rechargeable batteries
Charges up to 8 batteries simultaneously
Intelligent charging monitors each individual slot
With discharge function for consistently high battery performance
Tests capacity and diagnoses inserted batteries with coloured LED indicators
Shutdown after 17 hours and Delta-U voltage monitoring (automatically switches to trickle charging)
Suitable for worldwide use with 100-240V input voltage
Overcharge and reverse polarity protection
Fully automatic rechargeable battery recognition
Charging programme: Refresh, charging and trickle charging
Batteries not included
Rechargeable battery type (Ni-MH/Ni-Cd)
Micro (AAA)
Mignon (AA)
Baby (C)
Mono (D)
9V block
Capacity (mAh): 150-1000 / 600-2500 / 1000-5000 / 1000-9000 / 100-200
Charging time (h): approx. 0.7-4.7 / 1.2-5 / 1.4-7 / 1.4-12.6 / 2-4
Charging current (mA): 300 / 700 / 1000 / 1000 / 70
Product downloads

Posted on

UltimateSpeed Battery Charger with Jump Start Function ULG 12 B3

IAN: 290923

Manual

Features
Battery Charger with Jump Start Function ULG 12 B3
Can start engine with low battery without lengthy charging
For car and motorcycle batteries with 12V or 6V and 8-180Ah capacity
Program selection for recharging with optimal adaptation to battery type
Alternator tester for performance testing
Protected against reverse polarity, short circuit and overload
Intelligent microprocessor control with diagnostics programme and controlled charging process
Recharges drained batteries
Long-term connection for optimal charge retention without sulphate formation
LCD display for charging process, voltage value and charge status
Lateral charging cable holder for neat storage
Suitable for all lead-gel and lead-acid batteries