The best source of information about products. It's EverGreen!
Power: 25 W
Heating time: approx. 5 minutes
Temperature: max. 200 ° C
PARKSIDE® hot glue gun, 25 W, 5 min heating time
properties
Universally applicable for gluing, sealing, grouting, handicrafts and decorating
2 operating modes for maximum flexibility:
Cordless use for short, selective gluing jobs
With direct cable connection for continuous gluing work
Quickly ready for use thanks to the short heating-up time
Table station for heating up the hot glue gun for cordless use
Folding bracket for safe parking outside the station
For standard glue sticks with Ø 11 mm
Including storage case
Accessories included: 3 glue sticks, 18 cm each
Technical specifications
Rated consumption: 25 W (at start-up 500 W)
Heating time: approx. 5 minutes (approx. 150 ° C)
Max. Temperature: 200 ° C (+/- 10 ° C)
Operation: power cord / wireless (after heating up in the station)
Glue amount: approx. 20 g / min
Dimensions
approx. 212 x 164 x 53 mm
weight
approx. 295 g
PARKSIDE® compressed air sandblasting gun »PDSP 1000 D5«, including attachments
properties
Ideal for removing paint, varnish, rust and stubborn dirt
Adjustable flow of blasting material
Suitable for all common abrasives with a grain size of 0.21-0.35 mm (grain size 40-60)
Including attachments for efficient processing of large and small areas as well as edges
Recommended compressor: from 50 liters tank volume
Included accessories: 1 collection bag with screw clamp, 1 connection nipple (pre-assembled), 1 surface, point, edge and inner corner attachment each, 2 x 1 kg of blasting material (aluminum oxide) in grain size 0.21-0.35 mm (grain size 40-60 )
Technical specifications
Air consumption: max. 320 l / min
Blasting material tank: approx. 0.9 l
Working pressure: max. 6.3 bar
material
Housing: acrylonitrile / butadiene / styrene (ABS), polyethylene (PE)
Clamp: iron
Sack: fabric
Attachments: polyvinyl chloride (PVC)
Dimensions
approx. 254 x 288 x 108 mm
weight
Sandblasting gun: approx. 432 g
Attachments (4 pieces): approx. 171 g
2 blasting material containers: approx. 2,086 g
Clamp: approx. 20 g
Collection bag: approx. 20 g
PARKSIDE® compressed air sandblasting gun »PDSP 1000 D5«, including attachments
properties
Ideal for removing paint, varnish, rust and stubborn dirt
Adjustable blasting material flow
Suitable for all common abrasives with a grain size of 0.21-0.35 mm (grain size 40-60)
Including attachments for efficient processing of large and small areas as well as edges
Recommended compressor: from 50 liters tank volume
Included accessories: 1 collection bag with screw clamp, 1 connection nipple (pre-assembled), 1 surface, point, edge and inner corner attachment each, 2 x 1 kg of blasting material (aluminum oxide) with a grain size of 0.21-0.35 mm (grain size 40-60 )
Technical specifications
Air consumption: max. 320 l / min
Blasting material tank: approx. 0.9 l
Working pressure: max. 6.3 bar
material
Housing: acrylonitrile / butadiene / styrene (ABS), polyethylene (PE)
Clamp: iron
Sack: fabric
Attachments: polyvinyl chloride (PVC)
Dimensions
approx. 254 x 288 x 108 mm
weight
Sandblasting gun: approx. 432 g
Attachments (4 pieces): approx. 171 g
2 blasting material containers: approx. 2,086 g
Clamp: approx. 20 g
Collection bag: approx. 20 g
Cordless hot glue gun »PHPA 20-Li A1«, without battery and charger
properties
Universally applicable for gluing, sealing, grouting, handicrafts and decorating
Quickly ready for use due to the short heat-up time
Integrated LED work lighting
Ergonomic handle with soft grip equipment
For standard glue sticks with Ø 11 mm (e.g. from Parkside, Steinel, Bosch etc.)
Incl. Carrying case
Device compatible with all batteries of the PARKSIDE X 20 V Team series
Delivery without battery and charger
You can order the right battery and charger here.
Accessories included: 3 glue sticks à 15 cm
Technical specifications
Max. Temperature: 180 ° C
Heating-up time: approx. 1 minute
Max. Working time: 60 min (with 4 Ah battery capacity)
material
Plastic, fiberglass
Dimensions
approx. 18.2 x 18.5 x 7 cm
weight
approx. 310 g
PARKSIDE® battery paint spray gun 20 volts »PFSA 20-Li A1«, without battery and charger
properties
3 spray patterns can be set: horizontal flat jet, vertical flat jet and round jet
Adjustable spray gun; with unscrewable paint container (max. 1000 ml)
2 insertable nozzles approx. Ø 1.8 and 2.6 mm
Even application of paint on smooth and structured surfaces
Volume-adjustable spray gun with non-slip soft grip equipment
Suitable for commercially available paints, varnishes and glazes with a viscosity of up to 70 DIN-sec
Including carrying case
Device compatible with all batteries of the PARKSIDE X 20 V Team series
Delivery takes place without battery and charger
You can order the right battery and charger here.
Included accessories: 1 x cleaning brush, 1 x cleaning needle, 1 x viscosity measuring cup, 1 x replacement filter,
Technical specifications
Water flow: 700 ml / min
Max viscosity: 70 DIN / sec
Tank capacity: 1000 ml
Paint application rate: 2 m² / min
Dimensions
Paint spray gun (without battery): approx. 298 x 290 x 140 mm
weight
Paint spray gun (without battery): approx. 998 g
PARKSIDE® hot glue gun »PHP 500 E3«, with two operating modes
properties
Universally applicable for gluing, sealing, grouting, handicrafts and decorating
2 operating modes for maximum flexibility
Cordless use for short, selective gluing jobs
With direct cable connection for continuous gluing work
Quickly ready for use thanks to the short heat-up time
Table station for heating up the hot glue gun for cordless use
Folding bracket for safe parking outside the station
For standard glue sticks with Ø 11 mm
Including carrying case
Accessories included: 3 glue sticks, 18 cm each
Technical specifications
Rated consumption: 25 W (at start-up 500 W)
Heating time: approx. 5 minutes (approx. 150 ° C)
Max. Temperature: 190 ° C (+/- 10 ° C)
Operation: power cord / wireless (after heating up in the station)
Glue amount: approx. 15 g / min
Dimensions
Hot glue gun: 212 x 164 x 53 mm
3 hot glue sticks: 180 x 11 mm
Case: 340 x 233.4 x 75 mm
Base station: 299 x 65 x 53 mm
Weight
Hot glue gun: 295 g
Base station: 139 g
IAN: 353316
Features
Heat Gun
PHLG 2000 E4
Universal tool for stripping, shaping or heating
Robust housing with ergonomic soft grip
Can be stood upright for stationary use
Can also be used to light barbecues
Functional description
The device can be controlled with a step
switch. On level I, an air quantity of
300 l/min at 350 °C. is reached. On level
II, the device reaches an air quantity of
500 l/min at 550 °C.
Technical specifications
Heat gun ……………… PHLG 2000 E4
Motor input power …………………2000 W
Mains voltage ……………… 230 V~, 50 Hz
Safety class ……………………………….. II
Level I
Temperature ………………………..350 °C
Air quantity ……………………. 300 l/min
Level II
Temperature ………………………..550 °C
Air quantity ……………………. 500 l/min
PARKSIDE hot glue gun »PHP 500 E3«, with two operating modes
properties
Universally applicable for gluing, sealing, grouting, handicrafts and decorating
2 operating modes for maximum flexibility
Cordless use for short, selective gluing jobs
With direct cable connection for continuous gluing work
Quickly ready for use due to the short heat-up time
Table station for heating up the hot glue gun for cordless use
Folding bracket for safe parking outside the station
For standard glue sticks with Ø 11 mm
Including carrying case
Accessories included: 3 glue sticks, 18 cm each
Technical specifications
Rated consumption: 25 W (at start-up 500 W)
Heating time: approx. 5 minutes (approx. 150 ° C)
Max. Temperature: 190 ° C (+/- 10 ° C)
Operation: power cord / wireless (after heating up in the station)
Glue amount: approx. 15 g / min
Dimensions
Hot glue gun: 212 x 164 x 53 mm
3 hot glue sticks: 180 x 11 mm
Case: 340 x 233.4 x 75 mm
Base station: 299 x 65 x 53 mm
Weight
Hot glue gun: 295 g
Base station: 139 g
PARKSIDE compressed air cleaning gun »PDRP 6.2«, with aluminum
properties
Intensive cleaning by powerful swirling air flow with microfine atomized cleaning agent
Ideal for upholstery, floor mats or structured surfaces
Compressed air gun made of powder-coated aluminum
Outlet nozzle with brush and integrated rotating nozzle
Infinitely variable detergent admixture
Removable cleaning fluid container with ml scale
Suitable for water-thinnable, non-foaming cleaning agents
Accessories included: ¼ “compressed air connection piece (pre-assembled)
Technical specifications
Max. Working pressure: 6.2 bar
Outlet system: rotating nozzle
Container volume: 1,000 ml
material
Gun: aluminum
Connection nipple: metal
Dimensions
Cleaning gun with container and attachment: approx. 338 x 220 x 135 mm
Container: approx. 145 x Ø 135 mm
Attachment: approx. 76.5 x Ø 48.5 mm
Weight
Cleaning gun with container and attachment: approx. 547 g
Container: approx. 115 g
Attachment: approx. 31.5 g