SilverCrest Outdoor Power Bank SPBL 10000 A1

OUTDOOR-POWERBANK/ OUTDOOR POWER BANK/ BATTERIE EXTERNE
POWERBANK D’EXTÉRIEUR SPBL 10000 A1

IAN: 313666

Features
Outdoor Power Bank
Portable charger for smartphones, tablets, e-book readers, etc.
Powerful 10000mAh Li-Ion battery pack
With LED battery capacity and charging status indicator
IP67: dustproof and water-resistant when temporarily immersed
USB charging cable and instructions included
Input voltage: 5V ⎓, input current: 2000mA
Output voltage: 5V ⎓, output current: 2000mA
Smart Fast Charge
Maximum current available is used to optimise charging time.
No memory effect
Low self-discharge
Constant high performance
Efficient and environmentally friendly

SilverCrest Qi Power Bank SQWP8000 1A1

QI-POWERBANK/ QI POWER BANK/ BATTERIE EXTERNE POWERBANK PAR
INDUCTION SQWP8000 1A1

IAN: 322236

Features
Qi Power Bank
Simple to use – no charging cable
With ‘Smart Fast Charge’ for improved charging times
For all Qi-enabled mobile devices, e.g.: iPhone X, iPhone XR, iPhone 8 / 8 Plus, Samsung Galaxy S8 / S8 Plus, S7 / S7 Edge, Note 8 and other Qi-supported smartphones
Powerful 8000mAh Li-Polymer battery
Separate USB port with 2-in-1 cable for charging devices with micro-USB or USB-C port
Rubberised non-slip ring
Protected against overheating, overcharging, deep discharge and short-circuiting
4 LEDs indicate charge status
No more tangled cables – simply put down your smartphone to charge it

Tronic Car 12V Power Inverter

IAN: 93506

Features
Power Inverter
Converts 12V (direct current) to 220-240V (alternating current)
Ideal as a portable power supply
USB output for charging all standard devices with USB charging function (5V/500mA)
Operates via 12V cigarette lighter or directly via the car battery (incl. connector cable/terminals)
Overheat, overload and surge protection
Overload indicator with audible signal
With replaceable 40A fuse – includes spare 40A fuse
Aluminium casing
Rated input voltage: 12V
Output voltage: 220-240V
Continuous power output: 300W
Please check the device manufacturer’s requirements

Tronic Power Inverter TSW 300 A1

IAN: 61667

Features
Converts 12V into 220-240V
Mobile power supply for mains-powered electrical equipment
USB output for charging standard devices with USB charging (5V/500mA)
[A] Operated via 12V cigarette lighter socket or directly via car battery
[B] Operated via 12V cigarette lighter socket, includes connector cable
[A] Includes connector cable for 12V cigarette lighter socket and battery terminals
[B] Practical design: fits inside the car’s beverage holder
Overheat, overload and surge protection
Overload indicator with audible signal
[A] With replaceable fuse (40A) in housing and 1 spare fuse (40A)
[B] With replaceable fuse (20A) on coil cable and 1 spare fuse (20A)
Rated input voltage: 12V
Output voltage: 220-240V
[A] Continuous output: 300W
[B] Continuous output: 150W
[A] Dimensions: 18.1 x 6.1 x 7.5cm (W x H x D)
[B] Dimensions: 18.8 x 12.7 x 6.1cm (W x H x D)
Please note the requirements specified by the device manufacturer

Tronic Mobile Power Supply

IAN: 33212

Features
Practical mobile power supply with powerful 12V rechargeable battery (7Ah)
Ideal for powering small electrical appliances (up to 10A) such as razors, cool boxes, etc.
Power supply via low voltage connection (max. 1A) for equipment with 3-4,5-6-9-12 V
Extra cigarette lighter socket (12V, max. 10A)
Recharge the energy station with mains or car battery
LED display for battery level and charging level
With practical shoulder carry strap and storage compartments on the side
Includes mains attachment, connector cable, 12V adaptor and 5-piece adaptor set (barrel and phone connectors) for versatile use
Mains adaptor
Connecting cable
12V adaptor
Adaptor Set

UltimateSpeed Power Bank With Compressor UPK 10 A1

IAN: 290781

Features
Power Bank With Compressor UPK 10 A1
4-in-1 power bank with powerful Li-Ion battery (14Ah)
Protected against reverse polarity, short circuit, overload and overheating
Recognises defective or deeply discharged car batteries
Charge indicator via 4 LEDs
Includes mains charger, car jump leads, USB cable and 3 compressed air attachments (nozzle, ball needle, air bed adaptor)
Car jump starter suitable for petrol engines up to max. 2000cc and diesel engines up to max. 1600cc
Maximum compressor operating pressure: 10 bar

Characteristics:
4-function powerbank with powerful Li-ion battery:
10 bar compressor with integrated compressed air hose and pressure gauge
Car Jump Starter with instant start by high current pulse
USB charging port for smartphones, tablets or Mp3 players
LED light
Protected against reverse polarity, short circuit, overload and overheating 4 in 1
Detection of defective or deeply discharged car batteries
Charge level indicator via 4 LEDs
Car starting aid suitable for gasoline engines and diesel engines

Technical details:
Li-ion battery: approx. 14000 mAh
Voltage: approx. 230 Volt, 50 Hz
Maximum charging time Battery: 8 hours
Input current: 1A at 12 volts
Output current: approx. 12 volts, 2 A
Peak current: approx. 400 A (3S)
Maximum compressor operating pressure: 10 bar
Maximum air capacity: 20 liters / minute
Jump start: approx. 200 A (12 Volt)
Jump starter suitable for:
Petrol engines up to a maximum of 2.0 liters
Diesel engines with a maximum displacement of 1.6 liters

Dimensions:
Main unit: approx. W 18 x H 6,1 x D 18,4 cm
Jumper cable: approx. L 29.5 cm
Charging cable: approx. L 30.5 cm

Mass:
Main unit: approx. 1.15 kg
Jumper cable: approx. 149 g
Charging cable: approx. 47 g

SilverCrest Kitchen Tool Egg Cooker SED 400 A1

IAN: 288280

Features
Egg Cooker
Electronic cooking time monitor
Cooks eggs to varying degrees of hardness in one cycle
Control dial for adjusting the hardness (soft, medium, hard)
Cooking tray made from stainless steel*
For up to 7 eggs – plastic cooking tray with convenient handle
Measuring cup with egg piercer and max marking
An alarm sounds when eggs are cooked
With stainless steel details and cable storage
Cooking tray, cover and measuring cup suitable for dishwashers**
Power consumption: 400W

Parkside Power Sander PPS 200 A1

IAN: 289615

Features
Power Sander PPS 200 A1
Combined triangular and rectangular sander plate for surfaces and corner areas
Triangular plate can be fitted on two sides for efficient processing of intermediate spaces
Quick and easy sanding sheet changes with hook & loop fastener
Ergonomic handle with non-slip soft grip fitting
Switch with dust protection
Adaptor for external dust extraction
Suitable for standard triangular and square cut paper (e.g. Sandpaper Set PPSZ 60 A1 from Parkside)

Crivit 2 Line Power Kite LM-1419

IAN: 64432

Features
Hard-wearing power kite with excellent flight properties
Ideal for wind forces 2 to 6 Beaufort (6-49km/h)
Sail made from hard-wearing ripstop polyester with large cell profile for optimal dynamic pressure
Handle with anatomically shaped foam grips for comfortable handling
End attachments for neatly winding line – includes 2 x 25m twisted kite line
Small pack size and low net weight for easy storage – includes convenient carry bag with shoulder strap
Includes instructions for use
Material: sail: ripstop polyester, handle: aluminium, grips: EVA
Dimensions: mat kite: approx. 160 x 55cm; handle: length: approx. 53.5cm
Net weight: approx. 370g
Sporting good. Not a toy. Only suitable for older children and adults.
Handle with foam grips
Side kite line winder
14 sturdy cells

Parkside Cordless Hammer Impact Drill PABH 20-Li B2

IAN: 284962

Features
CORDLESS HAMMER DRILL PABH 20-Li B2
For powerful processing of concrete, stone, metal or wood
Tool holder based on the SDS-plus system
Variable impact and speed control via trigger switch
Left/right rotation
3-stage battery status indicator
60-minute fast charger with automatic charge switch-off
Integrated LED work light
With non-slip soft-grip features
Battery: 20V Lithium-Ion (2Ah)
Impact energy: approx. 1 joules
Impact rate: 0-5000 bpm
No-load rotation speed: n₀ 0–900 rpm
Max. drilling diameters: 10mm in concrete and stone / 8mm in metal / 16mm in wood
Accessories included: 3 SDS-Plus drills (6/8/10 x 150 mm), 3 HSS drill bits with hexagonal shaft (5/6/8mm), 4 screwdriver bits (50mm), 1 bit extension , 1 bit adaptor