Posted on

PLAYTIVE® wooden vehicle sets, 3 piecesFunction: Toy vehicle setSpecial feature: with magnetic couplings Recommendedage: from 2 years

PLAYTIVE® wooden vehicle sets, 3 pieces
properties

Made from European beech wood
All vehicles with magnetic couplings
Can be combined with other Playtive train and vehicle sets
Compatible with standard wooden rail and wooden road sets
Age recommendation: from 2 years
Emergency vehicle set: with police car, ambulance and fire engine
Construction site vehicle set: with concrete mixer, dump truck and wheel loader
Agricultural vehicle set: with tractor, combine harvester and Unimog
Racing car set: with racing cars in blue, silver and red
Transport vehicle set: with helicopter, bus and taxi

material

Beech wood

Posted on

PLAYTIVE® construction vehicles, made of beech woodFeatures: with 4 wheels that can be pushed.Special feature: made of high-quality wood.Age recommendation: from 1 year

PLAYTIVE® construction vehicles, made of beech wood
properties

Made of high quality European beech wood
Playfully promotes creativity and motor skills
With 4 freely moving wheels to push
Age recommendation: from 1 year
Dump truck: With a loading platform that can be tipped over
Concrete mixer: With rotating drum
Wheel loader: With a moving shovel for lifting

Posted on

PLAYTIVE® wooden vehicle sets, 3-pieceFunction: Toy vehicle setSpecial feature: with magnetic couplings Recommendedage: from 2 years

PLAYTIVE® wooden vehicle sets, 3-piece
properties

Made from European beech wood
All vehicles with magnetic clutches
Can be combined with other Playtive train and vehicle sets
Compatible with standard wooden rail and wooden road sets
Age recommendation: from 2 years
Emergency vehicle set: with police car, ambulance and fire engine
Construction site vehicle set: with concrete mixer, dump truck and wheel loader
Agricultural vehicle set: with tractor, combine harvester and Unimog
Racing car set: with racing cars in blue, silver and red
Transport vehicle set: with helicopter, bus and taxi

material

Beech wood

Posted on

ULTIMATE SPEED® vehicle charger »ULGD 5.0«Intelligent microprocessor control with diagnostic program and fully automatic loading processMaterial: PolycarbonateDimensions: approx. 167 x 68 x 50 mm

ULTIMATE SPEED® vehicle charger »ULGD 5.0«
properties

Intelligent microprocessor control with diagnostic program and fully automatic loading process
For all car and motorcycle batteries with 6 V or 12 V and 1.2–120 Ah capacity
4 programs for optimal adaptation to the battery type
LC display for charging programs, voltage value and charging status
Impulse charging to revitalize discharged batteries I
Winter charging mode for low outside temperatures II
Protected against reverse polarity, short circuit and overload
Long-term connection for optimal charge retention without sulfate formation
LEDs for reverse polarity warning and standby mode
Charging current: max. 5 A
Ambient temperature: -20 ° C / + 50 ° C
Cable length: 1 x approx. 1.95 m and 1 x approx. 1.95 m
Operating voltage: 220–240 V ~ 50 Hz
Figure charging principle: Program 3 (14.4 V / 5.0 A)

material

Polycarbonate

Dimensions

approx. 167 x 68 x 50 mm

weight

approx. 510 g

I If the battery voltage is> 7.5 V (for 12 V batteries)
II For 12 V batteries

Posted on

SILVERCREST® vehicle holder, with inductive chargingUSB-A charging ports: 2Smart Fast Charge: Yes

SILVERCREST® vehicle holder with inductive charging
properties
For wireless charging of smartphones in the car
Car charger with 2 USB-A charging ports – 1 port with Qualcomm® Quick Charge ™ 3.0 technology for extra fast charging I
Smart Fast Charge:
Technology to optimize loading time
Please note the special requirements of your device manufacturer
Smartphone not included
Mat:
Flexible loading mat in anti-slip design
2 charging coils for improved charging performance
Integrated USB-A cable
Suction cup mount:
Bracket with suction cup
Including USB-A to micro-USB cable
Input voltage: 12/24 V.
I Requires end devices that are compatible with Quick Charge technology

Posted on

ULTIMATE SPEED® vehicle jack stand for 2, up to 2000 kgLoad capacity up to 2000 kgDimensions: each trestle approx. W 9.2 x H 28 x D 9 cm

ULTIMATE SPEED® vehicle jack stand for two
properties

Load capacity up to 2000 kg
Large contact surface for optimal load absorption
Height adjustable in 6 levels: approx. 24 / 26.7 / 29.5 / 32.2 / 35 / 37.7 cm
3 footrests each for a secure stand
With bolt chain safety device
Can be folded up to save space
2 pieces

Dimensions
each trestle approx. W 9.2 x H 28 x D 9 cm

Weight
approx. 3.3 kg (set)

Posted on

ULTIMATE SPEED® vehicle charger »ULG 17 A1«, starting aidDirect engine start with a weak battery without lengthy charging.Suitable for: Batteries with 12 V or 6 V and 8–250 Ah capacity.Operating voltage: 230 V ~ 50 Hz

ULTIMATE SPEED® vehicle charger with jump start function »ULG 17 A1«
properties
Direct engine start when the battery is weak without lengthy charging
For car and motorcycle batteries with 12 V or 6 V and 8–250 Ah capacity
Program selection for recharging with optimal adaptation to the battery type
Alternator tester to test performance
Protected against reverse polarity, short circuit and overload
Intelligent microprocessor control with diagnostic program and controlled charging process
Temperature sensor for adapting the charging characteristic at low temperatures
Pulse charging mode for revitalizing empty batteries
Long-term connection for optimal charge retention without sulfate formation
LC display for charging process, voltage value and state of charge
Automatic battery detection with display when the battery is defective
Lateral charging cable holder for tidy storage
Suitable for all lead-gel and lead-acid batteries
Technical specifications
Operating voltage: 230 V ~ 50 Hz
Charging currents: 2/6/17 A.
Direct start current pulse: approx. 75 A / 12 V

Dimensions
approx. W 32 x L 28.5 x D 13.5 cm

Weight
approx. 6.5 kg

Posted on

ULTIMATE SPEED® vehicle jack stand for 2, up to 2000 kg
Load capacity up to 2000 kg
Dimensions: each trestle approx. W 9.2 x H 28 x D 9 cm

ULTIMATE SPEED® vehicle jack stand for two
properties

Load capacity up to 2000 kg
Large contact surface for optimal load absorption
Height adjustable in 6 levels: approx. 24 / 26.7 / 29.5 / 32.2 / 35 / 37.7 cm
3 footrests each for a secure stand
With bolt chain safety device
Can be folded up to save space
2 pieces

Dimensions
each trestle approx. W 9.2 x H 28 x D 9 cm

Weight
approx. 3.3 kg (set)

Posted on

SILVERCREST vehicle holder, with inductive charging
USB-A charging ports: 2
Smart Fast Charge: Yes

SILVERCREST vehicle holder with inductive charging
properties
For wireless charging of smartphones in the car
Car charger with 2 USB-A charging ports – 1 port with Qualcomm® Quick Charge ™ 3.0 technology for extra fast charging I
Smart Fast Charge:
Technology to optimize loading time
Please note the special requirements of your device manufacturer
Smartphone not included
Mat:
Flexible loading mat in anti-slip design
2 charging coils for improved charging performance
Integrated USB-A cable
Suction cup mount:
Bracket with suction cup
Including USB-A to micro-USB cable
Input voltage: 12/24 V.
I Requires end devices compatible with Quick Charge technology

Posted on

ULTIMATE SPEED vehicle jack stand for 2, up to 2000 kg
Load capacity up to 2000 kg
Dimensions: each trestle approx. W 9.2 x H 28 x D 9 cm

ULTIMATE SPEED vehicle jack stand for two
properties

Load capacity up to 2000 kg
Large contact surface for optimal load absorption
Height adjustable in 6 levels: approx. 24 / 26.7 / 29.5 / 32.2 / 35 / 37.7 cm
3 footrests each for a secure stand
With bolt chain safety device
Can be folded up to save space
2 pieces

Dimensions
each trestle approx. W 9.2 x H 28 x D 9 cm

Weight
approx. 3.3 kg (set)