The best source of information about products. It's EverGreen!
PARKSIDE workshop file set, 17 pieces, with bag
Characteristics
For processing wood and metal
17 parts
Files with ergonomically shaped handles for comfortable and safe work
In a practical storage bag
Contents:
4 x workshop files (flat, half-round, round, triangular)
12 x key files (flat, half-round, round, triangular, square)
1 * cleaning brush
material
steel
Dimensions
approx. 34 x 14.5 x 5 cm
weight
about 1.1kg
PARKSIDE 2in1, installation of roller board / workshop stool »PRW 2 A1«, steel frame
properties
For assembly work under vehicles
Can be turned into an assembly stool in just a few steps
Stable steel frame
With upholstered head, seat and bed surfaces
6 swivel casters
material
Plastic, steel, imitation leather, foam
Dimensions
Roller board: approx. L 91 x W 41 x H 12 cm
Stool: approx. L 46 x W 41 x H 37 cm
Seat: approx. L 26 x W 31.5 cm
Weight
approx. 5.25 kg
Roller board with padded pads
Material: sturdy steel frame
Castors: 6 swivel castors
PARKSIDE® 2in1 assembly roller board / workshop stool »PRW 2 A1«
properties
For assembly work under vehicles
Can be adjusted to an assembly stool in just a few steps
Stable steel frame
With upholstered head, seat and lying areas
6 swivel castors
Load capacity (roller board / stool): max. 150/120 kg
Including assembly material and operating instructions
material
Support surface: foam, synthetic leather
Castors: polypropylene (PP)
Frame: steel
Dimensions
Roller board: approx. W 41 x H 12 x L 91 cm
Stool: approx. W 41 x H 37 x L 46 cm
Seat: approx. W 31.5 x L 26 cm
weight
approx. 5.25 kg
PARKSIDE® 2in1 assembly roller board / workshop stool »PRW 2 A1«
properties
For assembly work under vehicles
Can be adjusted to an assembly stool in just a few steps
Stable steel frame
With upholstered head, seat and lying areas
6 swivel castors
Load capacity (roller board / stool): max. 150/120 kg
Including assembly material and operating instructions
material
Support surface: foam, synthetic leather
Castors: polypropylene (PP)
Frame: steel
Dimensions
Roller board: approx. W 41 x H 12 x L 91 cm
Stool: approx. W 41 x H 37 x L 46 cm
Seat: approx. W 31.5 x L 26 cm
weight
approx. 5.25 kg
PARKSIDE® 2in1 assembly roller board / workshop stool »PRW 2 A1«
properties
For assembly work under vehicles
Can be adjusted to an assembly stool in just a few steps
Stable steel frame
With upholstered head, sitting and lying areas
6 swivel castors
Load capacity (roller board / stool): max. 150/120 kg
Including assembly material and operating instructions
material
Support surface: foam, synthetic leather
Rolls: polypropylene (PP)
Frame: steel
Dimensions
Roller board: approx. W 41 x H 12 x L 91 cm
Stool: approx. W 41 x H 37 x L 46 cm
Seat: approx. W 31.5 x L 26 cm
Weight
approx. 5.25 kg
PARKSIDE angled bit holder / HSS screw extractor / Hole saws / Hinge hole drill sets / Flexible shaft
properties
Hinge hole drill:
Sizes: 2.8 – 3.5 – 4.2 mm
with 1/4 “hexagon shaft for quick and easy changing
Hole saw set:
4 pieces black hole saws made of carbon steel and 1 piece holder
Hole saws:
Size: 32 – 38 – 45 – 54 mm
Cutting depth: 25 mm
Recording: Size: 3/8 triangle shaft
HSS screw extractor:
Sizes: 0-1-2-3-4
Suitable for removing screws and drills with a size of 6 – 12 mm
Angle bit holder with bit set:
1 angular bit holder + 5 bits:
Bits:
PH: PH1 – PH2 – PH3
SL: 4.5-5.5
Flexible shaft:
Shaft for cordless screwdriver
Bendable & flexible extension
Max torque: 8Nm
Without VPA certified mark
material
Hinge hole drill:
4 parts
Hinge hole drill: copper
Drill: steel
Hole saw set:
5 parts
Hole saws: carbon, steel
Recording: steel
Drill: carbon, steel
HSS screw extractor:
5 parts
steel
Angle bit holder with bit set:
6 pieces
Angle bit holder + 5 pcs. Bits: steel
Angle bit holder spindle: carbon, steel
Dimensions
Hinge hole drill:
2.8: approx. L 90 mm
4.2: approx. L 100 mm
3.5: approx. L 99 mm including an Allen key
Hole saw set:
each approx.H 27 mm
HSS screw extractor:
0: approx. L 56 mm
1: approx. L 56 mm
2: approx. L 55 mm
3: approx. L 55 mm
4: approx. L 55 mm
Angle bit holder with bit set:
Angle bit holder: approx. L 138 mm
Bit: approx. L 25 mm
Flexible shaft:
approx L 285 mm
Weight
Hinge hole drill: approx. 115 g
Hole saw set: approx. 199 g
HSS screw extractor: approx. 99 g
Angle bit holder with bit set: approx. 179 g
Flexible shaft: approx. 96 g
PARKSIDE 2in1 assembly roller board / workshop stool »PRW 2 A1«
characteristics
For assembly work under vehicles
Can be adjusted to an assembly stool in just a few steps
Stable steel frame
With upholstered head, seat and lying areas
6 swivel castors
Load capacity (roller board / stool): max. 150/120 kg
Including assembly material and operating instructions
material
Support surface: foam, synthetic leather
Rolls: polypropylene (PP)
Frame: steel
Dimensions
Roller board: approx. W 41 x H 12 x L 91 cm
Stool: approx. W 41 x H 37 x L 46 cm
Seat: approx. W 31.5 x L 26 cm
Weight
approx. 5.25 kg
properties
For indoor and outdoor
LED workshop spotlights (except sockets) protected against contact, dust and splash water (IP54)
2 hinged lid sockets for connecting additional devices – splash-proof (IPX4)
Durable LED spotlight with high light output
Stable housing with folding bracket and protected switch
LED module not dimmable and not interchangeable
Technical details
Voltage: approx. 230 volts AC, 50 Hz
Luminous flux: approx.2,400 lm
Color temperature (light color): approx.5,000 K (cool white)
Total power consumption radiator: approx. 23 watts
Total maximum socket power: 2,500 watts
Adjustable angle of the housing using a folding bracket: approx. 15 °
LED beam angle: approx. 100 °
LED lifespan: approx. 30,000 hours
Energy savings of up to 80% compared to a 150 watt normal incandescent lamp
material
aluminum
plastic
Dimensions
W 23.3 x H 16.9 x D 10.5 cm
Cable: approx. L 1.5 m
Weight
approx.1.75 kg
Properties
Hinge hole drill:
Suitable for standard hinges
3 hinge hole drills with hexagon shank (6.35 mm / ¼ “)
1 hexagon wrench
Set of 4
Hole saw set:
For precise cuts in wood, plastic, plaster and non-ferrous metals
4 hole saws made of carbon steel
1 pilot drill with triangular shank (9.53 mm / (³⁄8 “)
Max. Depth of cut: approx. 25 mm
Set of 5
HSS screw extractor:
For removing screws and bolts with diameters from 6 to 12 mm
5 screw extractors with hexagon shank (6.35 mm / ¼ “)
Set of 5
Angle bit holder with bit set:
Narrow design – ideal for confined areas
1 angle bit holder with all-round adjustable handle
5 screwdriver bits
Max. Number of revolutions: 300 min-1
Set of 6
Flexible shaft:
Bendable in shape
With hexagon shank (6.35 mm / ¼ “)
Max. Torque: 8 Nm
scope of delivery
Hinge hole drill:
3x hinge hole drills (sizes: 2.8 / 3.5 / 4.2 mm)
1x hex key
Hole saw set:
4x hole saw (diameter: 32/38/45/54 mm)
1x pilot drill
HSS screw extractor: 5x screw extractor (sizes: 0/1/2/3/4)
Angle bit holder with bit set:
1x angle bit holder
5x screwdriver bits (PH1 / PH2 / PH3, SL 1.0 x 4.5 mm, SL 1.0 x 5.5 mm)
1x flexible shaft
material
Hinge hole drill: 40Cr steel, copper, high-speed steel
Hole saw set:
45 carbon steel, A3 steel
Drill: 45 carbon steel, heat treated
HSS screw extractor: high-speed steel
Angle bit holder with bit set: S2 steel, chrome-plated, 45 carbon steel
Dimensions
Hinge hole drill:
2.8: approx. L 90 mm
4.2: approx. L 100 mm
3.5: approx. L 99 mm
Hole saw set: approx. H 27 mm
HSS screw extractor:
0: approx. L 56 mm
1 – 4: approx. L 55 mm
Angle bit holder with bit set:
Angle bit holder: approx. L 138 mm
Bit: approx. L 25 mm
Flexible shaft: approx. L 28.5 cm
Weight
Hinge hole drill: approx. 115 g
Hole saw set: approx. 199 g
HSS screw extractor: approx. 99 g
Screwdriver and bit set: approx. 179 g
Flexible shaft: approx. 96 g
IAN: 322310
Features
2-in-1 Car Creeper & Stool
For working under vehicles
Converts to a stool in just a few steps
Sturdy steel frame
Cushioned surface
6 castors
Features
For assembly work under vehicles
Adjustable to the assembly stool in just a few steps
Sturdy steel frame
With padded head, seat and lying surfaces
6 swivel castors
Including mounting material and operating instructions
Can be loaded as a roller board up to a maximum of 150 kg
Can be used as a stool up to a maximum of 120 kg
material
Contact surface: foam, synthetic leather (polyvinyl chloride (PVC))
Rolls: polypropylene (PP)
Frame: steel
Dimensions
Rollboard dimensions: approx. W 41 x H 12 x D 91 cm
Dimensions stool: approx. W 41 x H 36 x D 46 cm
Seat: approx. W 26 x L 31.5 cm
Rolls: each approx. Ø 5 cm
Weight
5.48 kg