Parkside Permanent protection wood gel, 5 l content, drip-inhibited, high UV and wood weather protection

Permanent protection wood gel, 5 l content, drip-inhibited, high UV and wood weather protection 1

IAN 331991

Properties
Permanent protection wood gel is a breathable wood glaze, suitable for many types of wood and set to prevent dripping
Also ideal for overhead work
High UV & wood weather protection
Suitable for all types of wood
Does not splash or drip
For indoor and outdoor
Areas of application inside: cladding and profiled wood
Areas of application outside: External cladding, wooden houses, roof cladding, garden houses, carports, pergolas, half-timbering and for renovating existing glaze coatings
Wherever the best weather protection and a hard-wearing surface are desired
Consumption: approx. 100 ml / m 2 with one coat
Low pollution – Blue Angel certification
Color: walnut

Processing tips
Wood outside: Wood in the outside area should be primed with a wood preservative beforehand to protect against blue stain and rot (use wood preservative carefully)
Wood inside: Treat wood indoors without wood protection primer with the PARKSIDE permanent protection wood gel. The wood must be clean, dry and stable. Peeling old coats and grayed wood should be sanded down to the healthy wood. Scrape out resin spots and clean with Universal Thinner
Permissible wood moisture: conifers max. 15%, hardwoods max. 12%
Do not use below + 5 ° C and in strong sunlight
material
Wood glaze
Dimensions
Bucket approx. Ø 181 x H 240 mm
content
5 liters

3 Replies to “Parkside Permanent protection wood gel, 5 l content, drip-inhibited, high UV and wood weather protection”

  1. I’m struggling with the ‘prime first with a wood preservative’ bit. It’s a bit vague. And given this seems to be a breathable, water-based product how can I be sure applying a preservative will still allow it to breathe?

Leave a Reply

Your email address will not be published. Required fields are marked *