PARKSIDE hammer and chisel hammer »PBH 1500 F6«, 1500 watts
properties
For powerful processing of concrete, stone, metal or wood
Pneumatic hammer mechanism with high impact
Central selector switch for all functions:
Drilling – without a blow
Hammer drilling – with activated hammer mechanism
Chisels – activated striking mechanism with turning stop
Chisel alignment setting (stepless)
Keyless chuck with holder according to the SDS-Plus system
Attachable ring gear drill chuck for round shank drills (not for hammer drilling or chiseling)
Additional handle can be rotated through 360 °
Switch pusher with adjusting wheel for speed limitation
Non-slip soft grip equipment
Control lamp to indicate the consumption of carbon brushes
Included accessories: 3 SDS drills (12 x 160 mm, 16/18 x 250 mm), 1 pointed chisel (14 x 250 mm), 1 flat chisel (14 x 25 x 21 mm), 1 metal depth stop, 1 ring gear drill chuck for round shank drill including key , 1 two-hole installation key
Technical specifications
Nominal output: 1,500 watts
AC motor, aluminum winding
Idling speed: 0 – 800 min -1
Idle speed: 0 – 3,900 min -1
Impact energy: 5 J
Vibration damping
Max. Drilling capacity Ø:
Concrete and stone: 32 mm
Metal: 13 mm
Wood: 40 mm
material
Housing: polyamide, glass fiber (PA6 + GF30)
Soft Grip: Thermoplastic Elastomer (TPE)
Case: hard polyethylene (HDPE)
Dimensions
Hammer (including additional handle): approx. 257 x 385 x 115 mm
Drill chuck with SDS adapter: approx. 107 x Ø 42 mm
Set of 3 drills:
approx. 160 x Ø 12 mm
approx. 250 x Ø 16 mm
approx. 250 x Ø 18 mm
Pointed chisel: approx. 250 x Ø 14 mm
Flat chisel: approx. 250 x Ø 14 mm
Depth stop: approx. 250 x Ø 6.5 mm
Case: approx. 312 x 420 x 135 mm
Weight
Hammer (including additional handle): approx. 4900 g
Drill chuck with SDS adapter (including key): approx. 350 g
Set of 3 drills: approx. 500 g
Pointed chisel: approx. 227 g
Flat chisel: approx. 240 g
Depth stop: approx. 53 g
Case: approx. 1430 g