SILVERCREST WLAN repeater »SWV 733 B3«, with 3 antennas, wireless router function
Frequency band: 2.4 GHz + 5 GHz number of
antennas: 3
Quickly and easily increases the range of the WLAN network

SILVERCREST WLAN amplifier AC dual band »SWV 733 B3«
properties
Quickly and easily increases the range of the WLAN network
Fast transmission technology according to the latest AC standard with up to 733 Mbit / s
Simple setup: automatically using the WPS button I / II or manually using a wizard using a network cable
2 modes can be selected:
Repeater: Range increase for WLAN networks
Access point: Access point in your home network, particularly suitable for routers that have not yet supported WLAN
Wireless router function – the device can also be used as a full router via the WAN connection III
1 RJ45 network connection (1x LAN / WAN port; 10/100 Mbit / s)
WiFi signal strength indicator
Supported WLAN standard: 802.11ac / b / g / n (2.4 GHz / 5 GHz)
Encryption: WPA2, WPA, WEP (64/128 bit)
System requirements:
Network protocol: common network protocols (TCP / IP), device with WPS support or RJ45 interface for configuration
Free app for quick and easy installation.
The WLAN repeater (SilverCrest SWV 733 B3) can be configured in a few minutes via your Android or iOS device
Due to the 5 GHz radio technology used, this device may only be used inside buildings. This usage restriction applies to the following countries: BE, BG, CZ, DK, DE, EE, IE, EL, ES, FR, HR, IT, CY, LV, LT, LU, HU, MT, NL, AT, PL, PT , RO, SI, SK, FI, SE, UK
I When using a router with WPS support
II Compatibility with all devices cannot be guaranteed, please refer to the manufacturer’s instructions for your router
III When using a DSL modem or similar. Wireless router function can only be configured in the access point via the web interface
Technical specifications
Frequency band: 2.4 GHz + 5 GHz
Chipset: Realtek
Data transfer rate: up to 733 Mbps (300Mbps at 2.4 GHz and 433Mbps at 5 GHz)
Supported network standards: 802.11ac, 802.11n, 802.11g and 802.11b
Antenna type: PIF antennas
Number of antennas: 3 pieces
Encryption: WPA2-PSK, WPA-PSK, WEP-64, 128
Mains voltage: 100-240V socket
Protocol support: Supports IPv4
System requirement: WLAN access point according to IEEE 802.11ac, n, g or b standard 230 V socket
Dimensions
97.4 x 58 x 82 mm
Weight
approx. 92 g
scope of delivery
WLAN repeater
Network cable
operation manual