PLAYTIVE wood RFID track
characteristics
Promotes creativity, imagination and fine motor skills
Rails made from European beech wood
With RFID Magic-Drive
Compatible with standard wooden rail and wooden road sets
Can be combined with other Playtive® train and vehicle sets
Battery-operated Magic Drive train with forward and reverse function and magnetic coupling
Magic Drive train tunnel set:
Self-propelled train with light tunnel and interactive arch
Red arc triggers a change of direction
Transparent tunnel with light effect
5 parts
Magic Drive train workshop set:
The self-propelled train stops automatically in the workshop and triggers a repair process
“Damaged” rail triggers noise
7 pieces
Magic Drive Drawbridge Set:
The self-propelled train stops automatically in front of the raised bridge and continues automatically as soon as the bridge is down again
Bascule bridge
4 parts
Age recommendation: from 3 years
Including batteries
material
Beech wood
Dimensions
Magic Drive Train-Tunnel-Railway:
Train: approx. L 10.9 x D 3.6 x W 5.1 cm
Light tunnel: approx. 22 x 7.9 x 7 cm
Magic Drive Train Workshop Railway:
Train: approx. L 10.9 x D 3.6 x W 5.1 cm
Workshop: approx. 31 x 16.5 x 14 cm
Magic Drive Train Bascule Bridge Railway:
Train: approx. L 10.9 x D 3.6 x W 5.1 cm
Bridge: approx. 34 x 11 x 16.5 cm (without ramps)
Weight
Magic Drive train-tunnel-train: approx. 427 g
Magic Drive train-workshop-train: approx. 450 g
Magic Drive Train Bascule Bridge Railway: approx. 486 g
Sadly, when the set is assembled the plastic train tracks both have grooves on the ends instead of a groove on one side and a tab on the other. This means that the tracks will change orientation from the entrance to the exit. If an extended track is built, the pieces will not connect together in a circuit because they will have two grooves where the circuit would connect. Adding a second set would resolve the issue, but as a standalone set out of the box it will not be compatible with other standard track pieces.