Tag: Charger

Posted on

SILVERCREST® wireless Qi dual chargerTotal power: 20 WOverheating protection: Yes

SILVERCREST® wireless Qi dual charger
properties
For charging 2 devices at the same time
For all Qi-enabled mobile devices e.g. E.g .: iPhone 11, iPhone X, iPhone XR, iPhone 8/8 Plus, Samsung Galaxy S10 / S10 Plus / S9 / S9 Plus, S7 / S7 Edge, Note 8 and other Qi-supported smartphones
Simply put your smartphone down and charge it
Elegant, compact and flat design
LED indicator light
Incl. USB charging cable (type A to type C)
Also charges through thin protective covers
Technical specifications
Input: 5 V 3 A
Wireless power (Qi): 2 x 5W max.
Input: 9 V 3 A / 12 V 2.25 A / 15 V 2A
Wireless power (Qi): 2 x 10W max.
Output: 2x 5 V 1A or 9 V 1.1 A
Total power: 20W max.
Dimensions
W 18 x H 8.5 x D 1 cm
Weight
approx. 130 g

Posted on

SILVERCREST® charger, with 2 USB-A outputsTotal output power: max. 24 WUSB-A output: 2

SILVERCREST® charger, with 2 USB-A outputs
properties
Up to two devices can be charged in parallel
For battery charging / power supply via the socket
With \ Smart Fast Charge \ “for optimized charging time
For mobile phones, tablets, e-book readers, etc.
2 x USB-A output
With white LED operating light
With overcurrent and short circuit protection
Smart Fast Charge: technology to optimize charging time
Please refer to the specific requirements of your device manufacturer to ensure that your device is supported
Technical specifications
Input voltage / current: 100-240V ~, 0.6 A
Output voltage / current: 5V?, 2.4 A (per connection), max.4.8 A (total)
Total output power: max. 24 W.

Posted on

ULTIMATE SPEED® vehicle charger »ULG 17 A1«, starting aidDirect engine start with a weak battery without lengthy charging.Suitable for: Batteries with 12 V or 6 V and 8–250 Ah capacity.Operating voltage: 230 V ~ 50 Hz

ULTIMATE SPEED® vehicle charger with jump start function »ULG 17 A1«
properties
Direct engine start when the battery is weak without lengthy charging
For car and motorcycle batteries with 12 V or 6 V and 8–250 Ah capacity
Program selection for recharging with optimal adaptation to the battery type
Alternator tester to test performance
Protected against reverse polarity, short circuit and overload
Intelligent microprocessor control with diagnostic program and controlled charging process
Temperature sensor for adapting the charging characteristic at low temperatures
Pulse charging mode for revitalizing empty batteries
Long-term connection for optimal charge retention without sulfate formation
LC display for charging process, voltage value and state of charge
Automatic battery detection with display when the battery is defective
Lateral charging cable holder for tidy storage
Suitable for all lead-gel and lead-acid batteries
Technical specifications
Operating voltage: 230 V ~ 50 Hz
Charging currents: 2/6/17 A.
Direct start current pulse: approx. 75 A / 12 V

Dimensions
approx. W 32 x L 28.5 x D 13.5 cm

Weight
approx. 6.5 kg

Posted on

SILVERCREST® wireless Qi dual chargerTotal power: 20 WOverheating protection: Yes

SILVERCREST® wireless Qi dual charger
properties
For charging 2 devices at the same time
For all Qi-enabled mobile devices e.g. E.g .: iPhone 11, iPhone X, iPhone XR, iPhone 8/8 Plus, Samsung Galaxy S10 / S10 Plus / S9 / S9 Plus, S7 / S7 Edge, Note 8 and other Qi-supported smartphones
Simply put your smartphone down and charge it
Elegant, compact and flat design
LED indicator light
Incl. USB charging cable (type A to type C)
Also charges through thin protective covers
Technical specifications
Input: 5 V 3 A
Wireless power (Qi): 2 x 5W max.
Input: 9 V 3 A / 12 V 2.25 A / 15 V 2A
Wireless power (Qi): 2 x 10W max.
Output: 2x 5 V 1A or 9 V 1.1 A
Total power: 20W max.
Dimensions
W 18 x H 8.5 x D 1 cm
Weight
approx. 130 g

Posted on

SILVERCREST® charger, with 2 USB-A outputsTotal output power: max. 24 WUSB-A output: 2

SILVERCREST® charger, with 2 USB-A outputs
properties
Up to two devices can be charged in parallel
For battery charging / power supply via the socket
With \ Smart Fast Charge \ “for optimized charging time
For mobile phones, tablets, e-book readers, etc.
2 x USB-A output
With white LED operating light
With overcurrent and short circuit protection
Smart Fast Charge: technology to optimize charging time
Please refer to the specific requirements of your device manufacturer to ensure that your device is supported
Technical specifications
Input voltage / current: 100-240V ~, 0.6 A
Output voltage / current: 5V?, 2.4 A (per connection), max.4.8 A (total)
Total output power: max. 24 W.

Posted on

PARKSIDE® charger »PDSLG 12 A1«, 150 watt, for charging 2 batteries, compact housing
From our “PARKSIDE X 12 V Team”
series. Rated input : 150 watts. Charging
current: 2 x 4.5 A

Double charger with
Compact housing with non-slip soft grip equipment
Device front with visual cutting line guide
Self-sharpening cutting blade
Compatible with all devices of the “PARKSIDE X 12 V Team” series
Delivery does not include a battery
You can order the right battery here!

Technical specifications
Rated consumption: 150 watts
Charging current: 2 x 4.5 A.
Charging time (2 Ah): approx. 60 min
Charging time (4 Ah): approx. 45 min
material
Housing: polyamide 6 (PA6 + GF30)
Dimensions
Charger: approx. 203 x 130 x 55 mm
Mains cable length: approx. 2 m
Weight
approx. 633 g

Posted on

ULTIMATE SPEED® vehicle charger »ULG 17 A1«, jump start
Direct engine start with a weak battery without lengthy charging
Suitable for: Batteries with 12 V or 6 V and 8–250 Ah capacity.
Operating voltage: 230 V ~ 50 Hz

ULTIMATE SPEED® vehicle charger with jump start function »ULG 17 A1«
properties
Direct engine start when the battery is weak without lengthy charging
For car and motorcycle batteries with 12 V or 6 V and 8–250 Ah capacity
Program selection for recharging with optimal adaptation to the battery type
Alternator tester to test the performance
Protected against reverse polarity, short circuit and overload
Intelligent microprocessor control with diagnostic program and controlled charging process
Temperature sensor for adapting the charging characteristic at low temperatures
Pulse charging mode for revitalizing empty batteries
Long-term connection for optimal charge retention without sulfate formation
LC display for charging process, voltage value and state of charge
Automatic battery detection with display when the battery is defective
Lateral charging cable holder for tidy storage
Suitable for all lead-gel and lead-acid batteries
Technical specifications
Operating voltage: 230 V ~ 50 Hz
Charging currents: 2/6/17 A.
Direct start current pulse: approx. 75 A / 12 V

Dimensions
approx. W 32 x L 28.5 x D 13.5 cm

Weight
approx. 6.5 kg

Posted on

Parkside battery pack dual rapid charger

charges two battery packs at once – even with different capacities
auto shut-off and three-segment charge indicator
also suitable for wall mounting
rated power consumption: 200W
max. charging current: 2 x 4.5A
charging time (20V / 4 Ah): 60 min
length of power cable: 6.5″
3-year limited warranty